Reply to thread

Message: [QUOTE="hwrdbd, post: 926729, member: 11049"] Or the pivot ball on the other end of the fork is broken, allowing the fork to rotate around the input shaft. This could also allow side to side movement. Either way, your best bet is to pull the tranny quick and see whats going on. I'd suggest wiggling the fork around as best you can by accessing through the slave cylinder opening. See if you can determine whether the fork is rotating around the input shaft (pivot ball issue) or if it is just moving up and down (throwout bearing issue). The pivot ball is like 5 bucks, and the throwout bearing about 50 if I remember right. Bare minimum order the pivot ball ahead of time, that should be replaced every time you pull the tranny, cheap insurance. I would also order the throwout bearing just so that you have it ready and aren't waiting on parts. You can always return it. [/QUOTE]

Verification

Random media

IMG00101-20100427-1510

Nerfs_Side_Full

capped

Pfm top

IMG_20171206_195951451

photo_26

99.5 7.3

wickedjester_com_2

Speaker and tweeter plugs

b7e9da12

Latest posts

Truck slipping into 4th
- Latest: Sterling6.7
- Yesterday at 8:29 PM
6.7 Tech
Do not recommend Choate Engineering
- Latest: DEEZUZ
- Wednesday at 10:22 PM
Newly Enlisted
A few turbo questions and a rant
- Latest: ghohouston
- Wednesday at 9:41 PM
7.3 Aftermarket
O
2011-2016 Radiator upgrade
- Latest: OtisCreekConstruction
- Wednesday at 6:17 PM
6.7 Tech
Performance shops
- Latest: DEEZUZ
- Tuesday at 8:42 AM
7.3 Performance

Members online

LivinAnAdvntr

Total: 527 (members: 2, guests: 525)

Top