Search results

I think last time I just used diesel oil from orielly. I think it was shell and a motorcraft filter. What brand is the BG MOA and what weight. Should I use. I'm used to gassers. Still learning on these motors. Thanks for all the help guys.

I just changed oil 2000 miles ago. But can again. It only does it while cold out. Once it warmed up to mid 30 it still did it but very very very faint. But when it was in teens it was loud. Supposed to be 50 this weekend and imma see if it still does it. Why would it only do it when really...

It's only bout 2-3 thumps, even on a cold start. I can shut off let sit 30 mins and didn't do it. How do I check the lifters?

I came out of work today and was 37. Started truck and had 1-2 very faint thump and was normal again. I'm guessing it's just from bein cold?

I replaced my moms lift pump in her 08 king ranch. So been driving it all week to see how it is. Yesterday was a high of 20. I came out of work and let the glow plugs cycle a few times and started. It made like 3-4 thumps out of what sounded like intake then stopped. Truck ran great and NO...

Yea nothing is done to truck at all. No deleted, tune, or anything.

Yea wasn't that hard being my first time doin it. Could probably done it a lil quicker but just wanted to make sure I was doin everything right. Hardest part was just unbolting front driveshaft on 4x4 to get water seperator out. But yea saved money buying just pump. I know on sunrise ford you...

We got my moms 2008 F350 King Ranch, 4 door and long bed for $20,500 in TX. Was a one owner truck. Has 160,000 miles, carfax of full service every 5,000 miles up to 156,000 miles. Oil, trans oil, trans filter, brakes and everything service religiously. Has a big brush guard and NO rust. Clean...

It's my moms truck and we always owned ford our whole lives. And don't wanna go to a different brand cause a fuel issue. I drain it once a month for her. Is it really that common or just really hyped up. I have 2 Lincoln Navigators, a 2007 Mazda 3, and my mom has a late 1980 F350 with a big...

I didn't see any metal shavings. It look more like sand in a way, dark and light brown grainy look. It was in a bottle and I tried putting a magnet to it but nothing was attracted to the magnet. The trucks running great now with new lift pump and pray it does, but this HPFP talk has me worried...

I'm new to Diesels and these 6.4's. Just put a lift pump in it this last weekend. Seemed like when drained so crap came out and don't know how much made it to the hpfp. But I'm always reading people have problems with the HPFP goin out and how hard and how much it is to replace. Do they offer...

Ok, well after help from you guys I figured the Lift pump on my moms 2008 F350 KR was out. So after searching I found you can buy just the Pump for $175. I've never worked on a diesel so I was nervous. Specially reading how some can't get it primed after new filters. The truck had half a tank...

Ok. I was just goin to order pump but I was goin to clean it all out real well. The diesel shop in town said they just replace pump. Not everything. But yea I was goin to do pump and filters. If I pull the lines, how much diesel is goin to spill out. And what's the procedure in pulling the...

I've found a few pumps online. I seen only ford sells the pump/water seperator as a whole unit. Oriellys and AutoZone sell just the pump, didn't offer water seperator. How should I go bout replacing it, replace pump then prime it up, replace lower filter, the prime it again, then replace upper...

It's the pump. I layed under there and brother turned key and nothing.was quite. Got truck started threw light on and shut off. So I layed under there and tapped on it with a hammer. Hit key and pump kicked on but sounded like crap. But cranked truck and fired up and no light. So I'm ordering a...

How hard is it to change the LPFP. What all do I have to do. Just unplug it and unbolt the 3 bolts, pull it out and replace. Does it need to line up some how inside. Will diesel spill out. And is there a filter inside the water separator too that I need to replace. I have another thread on this...

Well didn't work. I came back out and started it then it died. I'm guessing pump is bad. Dosnt make since why I could start it so many times earlier after swapping relay?

Well changed relay, fuse, cleaned connectors, and drained water. Truck started right up. Shut it off and restarted bout 4-5 times. No problem. Took it down road and let it get warm. Got home and shut it off. Restarted 4-5 times. Still no light. So hopin that was it. Thinking maybe relay was bad...

With my ohm meter set at 20k I get .81 ohms. Did I set it right. My wife's not home so I can't have her turn key right now to listen for pump. When I got up to start it. It instantly threw the wrench light. I swapped the relays around for the pump with the reverse lights and changed 20 amp...

And if higher than 5 than pump is bad?