Search results

I know their is new castings for the 6.0 available from the aftermarket. Does anyone know of anybody supplying 6.4 heads other then ford Thanks Travis

I have been scouring the net trying to find the correct part # for the stock replacement IH piston for the 6.4 anybody have that number and willing to share? Thanks Travis

I have been scouting fmc and ids all evening can find all the test procedures however can not fine the location on the ambient air temp sensor on a 11 cab and chassis. Truck is throwing a p0073 -40 degrees! Anybody know where it is Thanks Travis

Typically I wouldn't even ask this question and wouldn't even go down this route because I know singles shots are far superior, however we just put together a 96 service truck with a super-duty engine. Was a good running takeout with newer injectors. We will probably build a set of 200/30%...

Finally picked up a builder for our new test bed/shop truck. 2011 F350 Crew cab power XL Truck 4x4 Dually cab and chassis truck 230k miles. Was Wrecked, side swiped and jackknifed all cosmetic damage. Been working on it off and on for about a month now, She is getting sprayed white this...

Anybody running one of the 6.7 kits that allow you to run a duramax vgt charger. Im kinda liking the idea for dropping in a built vgt that would fit under the stock appearing turbo class rules! Travis

MPH is moving up to the 6.7 Picked up a wrecked cc 4x4 cab and chassis this weekend. Truck has 240k was built 6/11 Had a motor put in 1/13 and it has the metal oil pan. Owner said previous motor threw a rod, said it has had 4 turbos as well. Not sure on what all we are going to do to this...

Havent had the chance to get up under a 6.7 2wd with the 6r in it yet, Didford stay smart like they did with the 5r and make the 6r trans the same in both 4x4 and 2x4 with a removable flange. Kinda eye balling a truck that is a long way away but its 2wd which i am cool with if i can slap a...

I have two trucks here locally with spartan tuneing. One being the old ladys dads truck, His truck keeps throwing a p0088 and will not take more the 1/4 throttle runs like complete ass and is basically useless, We pulled the spartan off and sent it back to them for the updates they said it...

Anybody done much with the cab and chassis trucks. We installed an Xrt Pro Street on one with fair results. I have been thinking about trading a few trucks in on 12 f550 ext cab 84" ca truck for a flatbed/wheel lift truck for the shop, But Ill have to play with it. I know the chargers are...

We have been tinkering with a truck off and on for a while now, Its been to three other places and nobody has a clue (or the only recomendation so far was the tone ring on the cam gear is off/bad) The thing will sit and run all day long as long as you hold the RPM above 900 rpm, The moment it...

I have a good customer of mine who is moving to this area tom, Guy has a 04 6.0 Looking for a good reliable shop in his area that knows a thing or two about a 6.0 in case he needs anything. Thanks Travis

Anybody Making something better then these brittle plastic ones? For the lower coolant resivoir tank hose with the y. Seems like we replace alot of em cracked broken and leaking Thanks Travis

Got another pretty nice work truck, 150k miles 4x4 xl with power windows and cruise. vinyl 40-20-40 seats and vinyl floor. Does need tires currently. 15k bucks pretty straight truck, get ya into a 6.4 cheap! Its bone stock so far, its in the shop getting a high pressure turbo replaced as we...

have a super clean 2006 Ford f350 dually 4x4 automatic transmission. It is as clean and as nice as any 100k mile truck out thier Just shows a bunch more on the counter. It is loaded with new parts and ready to make someone a real nice truck. I am driving the truck personally right now and will...

Have a nice old work truck with the 7.3 powerstroke diesel with a zf 6spd manual transmission. It has almost new 19.5 tires all the way around, the truck only has 122k miles on it starts and runs great. It was a farm truck most of its life and had a 8-9' flat bed on it. It has some rust in the...

2008 F350 CC long bed 4wd automatic with 156k miles, power everything keyless entry, Tan Interior Clean 18" aluminum wheels new batteries, Deleted and Tuned New stainless exhaust, Runs Great. Completly serviced, Injectors and injection pump have been flowed and calibrated By Swamps and the truck...

Just came in today, Decided im gonna build a sheetmetal intake because we are gonna run in a non regulated class with that truck. RCD is selling it for $599 plus shipping, Ill ship it ground to your door for $575 Thanks Travis 859-991-8337

08 4dr dually with 24' wheels, KEM 345 tunes egr deleted, this is the second truck built identically that slips going into 5th, Last trans had a suncoast kit put in 3 times by a reputable dodge shop in the south. This one the owner wants a store bought trans that will hold up. and have a...

I have two excursion rollers, both were v10 with the motors removed, both have tan leather interior,both are currently 2wd and have trans still in them, Both ran and drove except had engine issues, Was gonna convert to 4wd and put something cool in for engines, 6.4 or 4b but we are just...