Deranged rebuild, the next chapter

Extended Power

New member
Joined
May 24, 2011
Messages
2,216
Reaction score
0
Post up summore pictures of the internals...
Looking at the bore in the picture, it doesn't look like there is alot of crosshatch...
 

Extended Power

New member
Joined
May 24, 2011
Messages
2,216
Reaction score
0
changing it up a bit. :thumbsup:



didnt get started as soon as I wanted, had to gather and work our replacement heifers. But started this afternoon and only got to the heads. one of the head gaskets were blown, Oil plug has metal shavings on it (expected) but what wasn't expected was this......

2df28f33.jpg


Only contacted on #4

Hell of an expensive way to build your own "Notched" pistons...


JK...
 

Cutting-Edge Diesel

Active member
Joined
Feb 10, 2012
Messages
5,738
Reaction score
0
Location
Newkirk, OK
got to the bottom end, rod bearing for #4 is gone, thats why the cylinder was contacting the head. Main baring got hot at some point. Dont know if it was from the other issues or not. Ill find out when I pull the crank. Done working on it today since its terkey day and all

674559ea.jpg

3605a490.jpg

0396aca4.jpg

3d17063a.jpg
 
Joined
Jun 3, 2011
Messages
154
Reaction score
0
i seem to recall when Dalpilot was running it there was oil system failure, could this be some residual damage from then, or were the bearings and crank done after that.
 

Dalpilot

New member
Joined
May 20, 2011
Messages
274
Reaction score
0
Location
Austin, TX
Last time it was starvation due to the shotty filtration system. Last time spun 7 and 8 hence the low volume. #4 is a mystery.
 

Latest posts

Members online

No members online now.
Top