04cr450
Active member
Playing around with the edge pids and selected the ebp data. What should numbers be 1:1? Because when I get on mine say 1/2 throttle - I will read around 26 psi of boost and 58 psi roughly ebp than it levels out to the same psi as the boost a second or so later. Is this normal for these trucks? Gh tuning race tune full diet etc. Truck runs like a top and only has 3,700 miles on it for reference.
I wish we had a dAta "in range" sheet to look off of like the 6.0 trucks have instead of wondering what these pids should be on the 6.7s... frustrating... all this time with these engines and refined tuning and nobody has "safe in spec " numbers to go off of.
I wish we had a dAta "in range" sheet to look off of like the 6.0 trucks have instead of wondering what these pids should be on the 6.7s... frustrating... all this time with these engines and refined tuning and nobody has "safe in spec " numbers to go off of.
Last edited: