ported intake manifold

[oneturboforme]

Just gotta give Doug at gogo diesel a big thanks for getting me that ported intake manifold he was very quick about it, Unforgently I did so much to my truck at once that I can't give any real numbers all I'm thinking it plays a huge role in helping my single spool so quickly, either way if you guys are looking at a ported intake manifold I highly recomend them

 

[08KingRanchF250]

Wats the cost? And how hard is the install?

 

[oneturboforme]

Cost is on his website... Just search gogo diesel, as for ease of install, my motor was torn down quite a bit but it took probably 1.5hrs to pull the intake and put the new one on... A note I did notice is my egts at wot only got to 1150.... As far as exhaust and intake that is the only mod I did....

 

[08KingRanchF250]

Aww cool Hummm... Wat single are u running?

 

[forcefed6.4ford]

I thionk that this is by far the best upgrade for the 6.4 after tuning, CAI, and exhaust.

 

[oneturboforme]

I'm running the 66mm from MPD

 

[08KingRanchF250]

Aww ok how do u like it? How'd it drive compared to stock? And where do u feel it added power? I'm about to do the 72mm myself

 

[jdgleason]

I thionk that this is by far the best upgrade for the 6.4 after tuning, CAI, and exhaust.

I agree! Cool to see some reviews on GoGo's manifold.

 

[oneturboforme]

I'm having issues with my fuel system, I think the hpfp took a crap, but I ran it for about 2days maybe 300miles, is say power increased everywhere, i have 60hp Nozzels so maybe thats why it spoils so well.. is say its like driving a dmax a little lag but when it lights it pulls hard, I'm ridding in my buddys 6.4 it has an intake and a dpf intact tuner right now, I think my bottom end may be a tad slower but it would smoke it after 10mph no doubt..

 

[08KingRanchF250]

Aww ok Well ill b on stock fuel for awhile I dont think it'll lag too bad... we will see

 

[onebadf150]

I thionk that this is by far the best upgrade for the 6.4 after tuning, CAI, and exhaust.

I agree also I've wanting to buy one from doug for sometime. Doug always comes up with the coolest stuff its good to see his products get some play.

 

[SEABEE08FX4]

They sell for 1000.00 shipped. You can find them here CLICK HERE.

I have one as well, it is a nice piece and its cleared out of all restrictions. I have more pictures of it if needed.

 

[08KingRanchF250]

Has there been anyone to install one and see gains other then drop in egt?

 

[forcefed6.4ford]

A gain in hp should viewed as a bonus with this mod. The benefit is balanced flow through the heads. Reliability and cooler egts are the key.

 

[oneturboforme]

Also i know there is a 20% difference from the front cylinders to the back with stock on the flowbench, with his intake its less then 1%,

 

[08KingRanchF250]

Aww ok Well thats a Good benefit

 

[oneturboforme]

I just got informed I cant send people dougs way but I :was told " PTP is a authorized dealer for Doug and GOGO so you could tell them to call Eric or Nate at PTP"
My bad

 

[WoodBoy]

This combined with Mike's new CAC pipe and high rise elbow may mean suffecient enough flow to the cylinders to help prevent losing pistons

 

[bigrpowr]

This combined with Mike's new CAC pipe and high rise elbow may mean suffecient enough flow to the cylinders to help prevent losing pistons

that is the hope bruther. thanks!

 

[redx]

Just gotta give Doug at gogo diesel a big thanks for getting me that ported intake manifold he was very quick about it, Unforgently I did so much to my truck at once that I can't give any real numbers all I'm thinking it plays a huge role in helping my single spool so quickly, either way if you guys are looking at a ported intake manifold I highly recomend them

Very quick? I placed my order for my IM on may 18th, its now nov 5th. You do the math.