PowerstrokeBen
New member
- Joined
- Feb 11, 2020
- Messages
- 11
- Reaction score
- 0
Trying to track down someone who can help me "reduce weight on a 2020 6.7 with ezlynk
Feel free to PM me.
Feel free to PM me.
Last edited:
Trying to track down someone who can help me "reduce weight on a 2020 6.7 with ezlynk
Feel free to PM me.
not available yet.
Even if it was, TCM tuning wouldn't be available and even if it was, you wouldn't want it. I bet it takes 1-2 years before TCM tuning is even getting done properly on that 10 speed. the 17-19 6R Trans tuning just finally got dialed in pretty good in 2019 for the most part.
They run great stock.Darn,
Well thanks for letting me know.. I'll be honest, I wouldn't have bought this if I knew that! I had a couple of the guys I purchased from before saying they could get them and then when the time came of course none of them could get them.
They run great stock.
With the way EPA stuff is today I would just run emissions on tuning anyway. They're 500HP/1000+ tq stock basically. That's a lot of power for a stock truck these days
Sent from my SM-N975U using Tapatalk
Not yet.Are you able to find emission compliant for 2020? I will need something as I purchased a lift and big tires.
not available yet.
Even if it was, TCM tuning wouldn't be available and even if it was, you wouldn't want it. I bet it takes 1-2 years before TCM tuning is even getting done properly on that 10 speed. the 17-19 6R Trans tuning just finally got dialed in pretty good in 2019 for the most part.
Ha good pointLmao there are still some guys that are trying to figure out the E4OD, let alone these new 10 speeds!
Are you able to find emission compliant for 2020? I will need something as I purchased a lift and big tires.
TCM tuning is supported on HP tuners already and it is fairly similar to the 10r80 in mustangs and f150s. Now people will have to dial it in. Obviously different platforms but the logic is similar between them. I heard it was a different ECU so that will probably take some time.not available yet.
Even if it was, TCM tuning wouldn't be available and even if it was, you wouldn't want it. I bet it takes 1-2 years before TCM tuning is even getting done properly on that 10 speed. the 17-19 6R Trans tuning just finally got dialed in pretty good in 2019 for the most part.
TCM tuning is supported on HP tuners already and it is fairly similar to the 10r80 in mustangs and f150s. Now people will have to dial it in. Obviously different platforms but the logic is similar between them. I heard it was a different ECU so that will probably take some time.
Sent from my LM-V450 using Tapatalk
These 2020s have plenty of power as is. My F450 hauls ass. I rather leave my warranty intact. Why not just lift it and recalibrate the tire size and enjoy. Does your 350 have 3.55s or 4.10s?
These 2020s have plenty of power as is. My F450 hauls ass. I rather leave my warranty intact. Why not just lift it and recalibrate the tire size and enjoy. Does your 350 have 3.55s or 4.10s?
A 10R140 crate transmission is almost 6K from what I have read.
Speedo calibration would likely need to by ford. Forscan can do it as well but the 2020 modules addressing has not been mapped out yet. What size of tire are you installing? Warranty claims seem to be situation to situation and dealer to dealer but if your power train is damaged and its been flashed they ha ve every right to deny responsibility. A 10R140 crate transmission is almost 6K from what I have read.