What did I burn up?

[WV Stud]

I had a pair of led's that I installed in the brake lights and now the only lights that work are my head lights.I went threw and checked all the fuse's with a test light and everything is good with them.What did I burn up ? The truck is a 06 F250

 

[Whytry]

Do you have power at your brake lights? Might be a ground issue

 

[G Racing]

Put the regular bulb back in and see if it works. Bet the led is bad

 

[WV Stud]

No power

 

[WV Stud]

Put the regular bulb back in and see if it works. Bet the led is bad

Tried that as well,I thought the same thing as you.Do these trucks have a computer type thing that controls all the lights ?

I know the Dodges have the TIPMs and they can burn up,they also cost about 700 bucks.Just hope that's not the case with this.

 

[WV Stud]

The following lights are not working

Brake
Signal
Back up
Tag
Gauge cluster
Cab

 

[Lethalthreat7.3]

Headlight switch. Pull the switch and I bet you will see a melted harness connector block.

 

[WV Stud]

Checked the fuses again and found 17 and 18 burnt up.Checked with a test light and one side of the fuse would not light up.Not sure how I missed it last night.