Search results
-
Major 7.3 Headscratcher
It's not the CPS. This problem has to do with the ICP system. New injectors did not resolve the problem either. -
Major 7.3 Headscratcher
The last part of the high pressure oil system that I believe it could be is inside the injectors. I have a set coming from Swamps for the truck. I wanted to exhaust all options before pulling the trigger on a 1800+/- job for the customer. -
Major 7.3 Headscratcher
I have checked continuity on all of the wiring and also inspected resistance. -
Major 7.3 Headscratcher
Customer changes own oil, rotella jugs in bed. Regardless it has 15w40 in it. I have not tried a whole new harness but I have tested continuity from one end to the other, there is NO interruption. As stated above, the ICP 5 volt reference is within spec, per fordinstallersupport.com... -
Major 7.3 Headscratcher
I don't see how a cam sensor could do this. I checked the resistance at the icp sensor. Its within spec. I have ohmed the entire harness that has to do with icp.... like the ipr, icp, 42 pin and pcm. -
Marty's Diesel Fuel System Update
My full fuel system does. My regulated return only doesn't. However if you want a kit that will I can do so as well.- Marty
- Post #7
- Forum: Marty's Diesel Performance
-
Major 7.3 Headscratcher
Well I have a truck here in the shop and I have not experienced this issue before and I can not for the life of me figure it out. I am hoping someone on here can give me some place to turn. Here is the story: Truck went to another shop before coming here for the same problem. ISSUE: Truck rpm... -
contribution/balance codes?
I just had a truck in here three days ago was very similar. Does your truck idle like it's running out of fuel pressure at all or shut off?- Marty
- Post #9
- Forum: 6.0 Aftermarket
-
Marty's Diesel Fuel System Update
For a 6.0, yes, the $1375 kit is complete. There is no part of the factory fuel system retained. On a 6.4, the kit is $1400 and it includes everything you need from tank to pump and back, including a fuel cooler delete, or we can use the fuel cooler. For additional money we can supply you with...- Marty
- Post #4
- Forum: Marty's Diesel Performance
-
Marty's Diesel Fuel System Update
As usual we sell a LOT of A-1000 kits. And I would like to point out we have had ZERO failures with them. These pumps have been able to handle anything a HEUI engine can throw at them as well as my customers that are running larger nozzles and double pumps on their 6.4's. We have a few customers...- Marty
- Post #2
- Forum: Marty's Diesel Performance
-
Marty's Diesel Fuel System Update
We have been extremely busy in the shop in recent months, which is why I barely log in. I have updated the 6.0 fuel systems and would like to let everyone know about it. If you have a previous 6.0 regulated return OR complete system, you can upgrade to the new stainless steel line setup for...- Marty
- Thread
- Replies: 6
- Forum: Marty's Diesel Performance
-
Efuel...best parts to use?
We have had zero issues on OUR A-1000's that we supply, once you do that... I am sure all of your problems will go away. As long as you have 3/8" going into the heads you will be good to go. Make the fittings/lines however you want. Stainless, braided, pushlock etc....- Marty
- Post #27
- Forum: 94-97 Aftermarket
-
Deadly accident at TS???
Does anyone know about the 6.4 truck that was on its side on I65 in Franklin ky ..... had two Medivacs on site.. -
Truck is down...Time to mod?
Stock OEM imo for your goals. Powermax or Barder... whatever is nice but in all but in reality do you need more HP then the truck currently makes? if you're only down 2 injectors... are you puking? if not, why not just replace the injectors and roll? Like you said, you have the mustang for speed.- Marty
- Post #7
- Forum: 6.0 Aftermarket
-
earlybroncoboy
earlybroncoboy You PM'd me and your inbox is full. Call the shop @ 410.392.3262. Thanks.- Marty
- Thread
- Replies: 0
- Forum: Marty's Diesel Performance
-
6.4 RCLB DD/Tow Rig Build
I see you got the MPD oil cooler setup like I suggested :D Now where is the Marty's Diesel Fuel System Pictures :p- Marty
- Post #44
- Forum: 6.4 Aftermarket
-
-
Marty's Diesel Fuel Systems
Best bet is to call me, I can send you over any picture you need. 443.553.9234. Anyone that purchases a fuel system gets to call me and I go over each section of the fuel system install with them as needed. As stated above it is not difficult to install... the hardest part is the fittings in...- Marty
- Post #50
- Forum: Marty's Diesel Performance
-
Progress thread
Had I known you were only running 75's I would have suggested something smaller then the A-1000. Call me again tomorrow and I'll tell you what you need to do to keep up with those injectors.- Marty
- Post #136
- Forum: 6.0 Aftermarket
-
2003 F350 6.0 dually for sale.
2003 F350 6.0L Dually crew cab Power Stroke for sale. 21x,xxx. I drive the truck all of the time so the miles are going to change. Clean & Clear title in hand.It has an EGR delete, new MOTORCRAFT oil cooler, reman FORD turbo with brand new VGT sensor, 5 new motorcraft injectors (covered under a...
