Search results
-
4r100 went bang
It did this cool new trick today where it shifted 4-3-4-3 within about 2 seconds. Also seems like it feels like it shifts in the middle of second gear but then shifts hard into third about 200 rpm later. Kinda scared to even drive it sometimes. Sent from my XT1058 using Tapatalk -
lets hear some opinions on what broke, my guess is crank.
It is a cab and chassis truck. Sent from my XT1058 using Tapatalk -
lets hear some opinions on what broke, my guess is crank.
Massive crankcase pressure from holed pistons? Sent from my XT1058 using Tapatalk -
Seat Options
Still not worth it since I would have to buy the covers too. Who makes seat foam for 2000 or 2001 Sent from my XT1058 using Tapatalk- mustube
- Post #12
- Forum: Aftermarket Super Duty 1999 - Current
-
lets hear some opinions on what broke, my guess is crank.
What would break on the crank to where it could still move? If it breaks at the back, it won't move but might run, and if it broke at the front, the cam wouldn't spin and wouldn't run at all. Would it be able to run if it broke in the middle? Does it start back up once you cut it off? My guess... -
Tunes.
You should try contacting a business next time (through the info on their site not a pm on a forum) instead of blasting them on a forum. Would you rather they work on your stuff or constantly reading forums so they see your bitching? Sent from my XT1058 using Tapatalk -
Seat Options
I priced out getting my foam fixed since nobody makes 01 foam and its close to 200 per seat and then they upholstery on top of that brings it well over 1k for just cloth. That's not to mention that when you get the foam fixed the new side is always different than the old side so it will still be...- mustube
- Post #10
- Forum: Aftermarket Super Duty 1999 - Current
-
t444e vs. superduty turbo
Don't those international motors also have the desirable hpop reservoir? The ones people do diy gen 3s out of? Sent from my XT1058 using Tapatalk -
t444e vs. superduty turbo
If they are really 125 a motor, I'd buy em all. -
Door Hinge Pins and strikers
I put a Dorman kit on my sisters obs the other day, and I'm not impressed. Maybe hers was more worn out than the kit was designed to compensate for but the door still sags when you open it. The pin looks like a grade 8 bolt and the bushings are some kind of bronze alloy that is kinda soft and...- mustube
- Post #2
- Forum: 94-97 Tech
-
4r100 went bang
Got it back today. ****'s still ****ed. It shifts worse now than it did before. Picked it up after 5 so I couldn't really talk to anyone about it. The 2-3 (the shift that broke it both times) shift is much harder, and the 4-3 downshift is ridiculous. I'm going to call Truck Source Diesel and see... -
Next set of Hummer tires...
CSIPSD lists a 4" lift in his signature.- mustube
- Post #55
- Forum: Suspension, Drive Train, and Tires
-
superduty prerunner project
If he passes on the wheels can you pm me a price? Sent from my XT1058 using Tapatalk- mustube
- Post #1,353
- Forum: Project Forum
-
Axle, front end etc.
Moog is easy to get and has a lifetime warranty on most stuff. I have tie rods and hubs. Tie rod has been fine. Hub has gotten really rusty and the spindle bearing failed on both even with new spindle vacuum seals. Spicer hubs at auto zone or online is what I would go with for hubs. Sent from...- mustube
- Post #4
- Forum: Suspension, Drive Train, and Tires
-
t444e vs. superduty turbo
I'm assuming the t444e turbo is an obs turbo and I can't see your Sig on my phone but I'm assuming by your username that you gave a 99 so yours has the newer turbo setup. If that's the case you could make it work but it wouldn't be worth the trouble. Sent from my XT1058 using Tapatalk -
Seat Options
You're talking fake leather vinyl and not xl plastic vinyl right? Sent from my XT1058 using Tapatalk- mustube
- Post #6
- Forum: Aftermarket Super Duty 1999 - Current
-
Seat Options
That thread is more about how they bolt in. I asked if anybody had the Baja seats and got no replies so I started my own thread.- mustube
- Post #4
- Forum: Aftermarket Super Duty 1999 - Current
-
Track bar vs bracket
With an adjustable track bar you are able to adjust the bar out enough to have your axle centered without any other brackets.- mustube
- Post #9
- Forum: Suspension, Drive Train, and Tires
-
Seat Options
The seats in my truck are about as worn out as seats can be. The fabric and the foam are both done. I'm looking for options as to what's out there in the aftermarket. I've been looking for newer Ford seats but there hasn't been anything out there that isn't overpriced and worn out. I'm looking...- mustube
- Thread
- Replies: 17
- Forum: Aftermarket Super Duty 1999 - Current
Members online
No members online now.