Search results

Hi Fellas, So we installed a ZF-5 with a twin disc clutch along with new master and slave. Actually the truck originally came to us as a 4X2 auto and we swapped in a D60 along with a ZF and clutch, peddles etc. At issue is the clutch disengages/engages right at the top of peddle throw. Has...

Hey Fellas, Need some insight, buddies 97 7.3 ZF-5 quit today after hitting a larger bump/rough spot on the highway. Truck shut down, will not fire. I gave him an ECM a couple weeks ago as he experienced same, installed my ALF4 ECM truck fired right up. Sent other ECM off for suspected repair...

Hey Fellas, Buddy of mine has a 6.0, batteries keep going flat. So he’s installed new batteries, new alternator still same results. Over 10 hrs they will go flat, nothing left on in the truck, this has just started to happen in the last 2 weeks. I’m not familiar with 6.0 so I’m not sure what...

Hey Fellas, Finally got round to installing an IC and it’s the all aluminum series from a SD 7.3. Have the OEM ford blue accordion boot on hot side and Black ford accordion boot on passenger side. What band clamps are you guys using to secure these on the cooler end. All my other connections...

Hey Fellas, Need comments on this notion. Periodically tow moderate weight in some steeper terrain here in B.C. Western Canada. Have the bits to install a temp probe. How hot is too hot for the ZF-5? I know they are a robust tranny and the ZF-6 comes from factory with a cooler. So the plan...

Hey Fellas, Looked here also did a google search and can’t seem to find. What I’m looking for is a female plug, somewhat like the one built into our alternator. Not the plug on end of wiring harness that plugs into the alternator, but a female receptacle that matches this plug. What I’m doing...

Did a search and realize I’m like 10 years (ok well beyond that), behind the crowd. Anyway, I understand the notion of Hybrids not requiring more than stock oil, sort of. Is there benefit if any, in running a performance say T500 with them? I did a search lots came up about various HPOPs but...

Hey Fellas, Given that it never ends :thumbsup: just chewing on next updates to Tan truck. The FFD 205/30s so far with Jelibult files are pretty fine, smooth linear feel in power, smooth idle its all good. Not sure on the EGTs, too long a tail to explain here, key thing is I need gauges and...

Hey Fellas, Finally got the FFD 205/30s installed, running stock HPOP for now. Question regarding program files. Have a number of files loaded and they all work ok specifically Jelibuilt files, very smooth idle, linear power delivery low smoke and pretty zippy. I don’t have an IC installed...

Hey Guys, Posted this over on PSN too... Have some PIS injectors that have been in a block sitting for 4-5 years, ran for maybe 500 kms before truck was parked. Thinking about installing in current Tan/White truck along with aftermarket T500 pump that’s with the PIS 175/80s. Aside from new...

Hi Fellas, Seems here in Western Canada, our trucks are ever popular and I’m fretting as every week 1 or more SDs or OBS trucks are stollen. Last one was 4 blocks from my house. The notion is to make some sort of kill switch. I do have a Hydra setting that truck starts and peddle is dead...

Hey Fellas, Looking for input with questions. Given I have to have a rear D shaft made up to accommodate ZF swap into Tan truck ECLB, with 3.5” RSK, blocks in rear to level. I’m thinking of doing (1) single shaft, so need input from guys that have done this and (2) did you use the stock shaft...

Tan truck is acting odd, upon start up will show low oil pressure, just above the “L” on the gauge, under 3 seconds pressure to L on start. After a while will show in middle of gauge as usual. Changed out the sensor with new Factory Ford one same same.... How to check by pass in filter head...

Hey Guys, Like doing things and wanna make a fuel system. Gonna use stock e fuel (7.3) pump have filters and aeromotive regulator with I think it’s AN 6 fitting holes in it. What I’m wanting to do is run SS hard line to the rear of each respective head and plumb into the stock fuel ports, what...

Been researching and can’t seem to find what years of rear springs can be used on my OBS sig truck. On my red truck I used 2003 SD springs and was wondering what late model ones might work? Have installed a PMF 3.5 RSK in the front with MY 2000 V codes (5200lbs), for now gonna use stock springs...

Need input Guys, Tan sig truck is gonna get a D60, RSK on SD spring in the next little bit, just wrapping up full rebuild (my son is) on the D60. I have some PIS 175/80 jectors, T500 along with a PI Stallion TC, if I installed this stuff along with a reputable shift kit say from BTS or John...

Hey Guys, Did a search and not much came up.....Vibration when driving and it's the rear universal so replacing with Spicer 5-178X which is a 1350 with a Zerk so I can put grease to it. So the last Universal is the exact same dimensions as above, but was loose with end to end play, meaning cap...

Will do a little how to when I finish all the pix.

Tell me why I should upgrade my 3 Van Aaken chips (for two trucks and a spare chip) to TS or PHP? Aside from ease of trying different files, what other advantages are there? Does PHP support Apple iOS Maverick? thanks, jrc

Not fully verses in all the turbos out there did a search and found nothing. Will the Borg Warner S366 support the billet 66 mm WWII has anyone tried this? Just wondering and thinking ahead to potentially use in '97 sig truck with 175/80's and T500 (soon as I get over this flu).... Was...