Search results

Pm sent, sootie. Sent from my iPhone using Tapatalk

Pmd

Yes, just did that yesterday when I cleaned the ebp. The hose looks to be in good condition. No cracks.

Ebp has been cleaned. No change in symptoms. The part that's confusing me is I can get the turbo to spool full boost when I first drive the truck. This is how my drive went today. Started the truck, let it warm up a little bit, left the house, got on the interstate. Did 1/2 throttle onto the...

So I tried a different Vgt solenoid, I received the same symptoms but the numbers on my CTS were reading all goofy (i.e. 85% while in gear at idle but the veins were clearly not wide open as an 85 value would be). It was a use solenoid but was "claimed" to be good. I'll probably run through...

Hey all, I recently had an issue arise on my truck during a little road trip I was on. The issue I am seeing is the turbo will spool up to about 10-12 lbs, then all of a sudden the boost drops off to zero and the truck starts smoking and will not accelerate, as if the veins opened all the way...

Wrapped my roof in matte black and finally finished my 6.7 pump install

you're saying just leave the hole in the foam but put a whole new piece of fabric on the headliner ? That's a possibility... Don't think the fabric will sag where the hole in the foam is? I didn't think about how easy it would come out the back, I just remember taking one out of a pickup before...

Long story short when I got this EX it looked as if there was an aftermarket dvd system in the headliner that was removed. Trying to figure out if I want to track down a similar unit to just fill the hole (99% sure it would never get used) or maybe make some type of overhead console out of fiber...

Sorry for the late reply. I didn't know there were so many different styles for the ficm brackets. I'll post some pics when I get a chance. But yes you're correct about what I'm looking for. The 10mm nuts with the concave shape.

I need the bolts that hold the ficm to the brackets. The circular looking ones.

I am looking for a couple ficm bolts (two specifically) and 2-3 of the latch clips that hold the air cleaner assembly together! Thanks

Yes I'm happy I found it, and it's not a bad thing I got the bearings in the rear end replaced, those were definitely coming to their time (170k). I was considering getting another bearing, maybe I'll get one in the near future to at least get it on the shelf of the garage

Well for anyone who is following this at all, or find it for the future. The noise ended up being a front passenger wheel bearing. This was undetectable during driving (loading and unloading left to right) or turning the bearing by hand. I purchased a bearing, put it on the driver side...

If you're buying it for your obs, why pick a truck brand to get the leather and not a company like katskinz or leatherseats .com?

Wow, awesome. Here, all along I thought you needed a filter in there otherwise it wouldn't flow. Thanks for the insight!

Was the removal easy?

I'm slightly unfamiliar with how the upper fuel bowl functions, but does it have a check valve in it, that doesn't allow fuel to flow if there isn't a filter in it? Or will fuel still flow without a filter ? Reason I ask is I'm in the process of gathering parts for putting a 6.7 pump in my...

I was just reading about this, gonna double check all of them, might even pull them out, because they are useless.

Yeah, I've done this procedure a few times, cannot replicate the noise up in the air, with no load on the tires. Interesting, well I did have the front passenger side apart last night and everything felt tight. But I suppose I could put the new wheel bearing in and see if it goes away, if...