Search results

Helping to build an all around farm/tow vehicle. It's a 2000 F350 that has 4.10 gearing, locally built 4R100, reg return, Tymar intake, 200/30% hybrids, SXE 364.5 w/ 80mm turbine and .91 housing, and a Hydra with Jelibuilt tuning. That's how the truck was purchased. With a hot street tune the...

Tired of tripping over this stuff and want it gone. Around 101K on all parts. Crankshaft $30 Front Cover $50 Camshaft $50 Cam Gear $25 Cylinder Heads $50 for the pair The heads have valves, springs, injector cups and a few hpo/fuel fittings. Exh manifolds are there but are...

John I'm trying to reply to your message but you need to clean out your inbox.

Since converting to hydroboost my vacuum pump only worked the HVAC controls. For years this worked fine and I never experienced any issues with the mechanical pump. Relocating my power steering reservoir next to the a/c compressor led to me looking to make some more room in this area. Taking...

Set of Rosewood 175/100 A code injectors for sale. Just under 1000 miles on them since rebuild. Nothing wrong with them at all, just wanting to try something different. $1100 shipped + I need a set of AA cores returned to me.

Been helping to try and sort this truck out but am about out of ideas on it. It's a 95 F350 with a 02 rear axle swapped in with hydroboost added. It is very difficult to stop, about have to stand on the pedal even at lower speeds. All 4 calipers are rebuilt NAPA Eclipse, pins and sliders are...

Helping someone with a 96 SRW 4x4 F350 that needs all new steering linkage, after 310K it is seriously worn out. She wants to replace it all with Ford parts and I have MEOE-133, MEOE-96, MDOE-13 and MEOE-51 for the links, ends and adjusters. I think those are all the updated Motorcraft...

I can't take credit for coming up with this mod. In my search I found discussions going back to at least 2004 about replacing the stock C2 pump with a C3 pump using all Ford parts. Any OBS owner knows the stock C2 is lacking in both flow and pressure and that most "re-manufactured" pumps...

I'm looking for the upper half of the Hypermax downpipe for their OBS H2E kit. I've been using one on my Bell LASB turbo w/ Carson's mount and it worked well. But I never got a chance to ever paint or coat it and too many New England winters have caused it to get pretty rotten and thin in spots.

I need to put a pair of 1/4 holes thru the firewall where the two black dots are. They are right over the brake booster. Where will I break into on the backside? I think they are too high to come into the cab. Perhaps in the wiper linkage area? Would like to know before I drill!

Installing hydraulic disc brakes on a trailer and need to decide on a pump unit, here are my 4 choices: ActuLink ACT-1600 Dexter K71-651-00 Carlisle Hydrastar HBA-16 Titan BrakeRite I have no experience with any of them. If anyone has feedback on these it would be appreciated. Price point...

Guys I have this Kennedy Versa cart that needs to be picked up from Hanover NJ and brought to Mocksville NC. Even if I could get it to southern VA or somewhere else in NC that would be fine. Can anyone help me out?

Short story is that a shop totally screwed up a front end alignment resulting in the outer edges wearing very quickly. I rotated these to back, got the alignment fixed and all has been good. However I've got a couple long distance heavy hauls to make and am wondering if these tires are safe to...

I'm in need of the lower half only of a 3x4 downpipe to fit my OBS F350. Too many winters up north finally did the old one in.

Working on installing a set of Comp 910 springs, first time I've done this job. I'm using a Comp Cams 4929 spring mic. Per the spring mic I'm getting a 1.906 measurement. However when I measure across the spring mic with my calipers I get 1.873. Confirmed this with a drop indicator...

New in the box set of front Hawk LTS pads part # HB334Y.736 These fit a lot of vehicles but were purchased for a 97 F350 $100 shipped

I purchased this from KT Performance in May 2011 and never installed it. Everything has sat in the sealed box until today when I took these pictures. Asking $600 shipped or I'd trade for/towards the following: 7.3 Fluidamper HB Jr. hpop upgraded 7.3 valve springs + pushrods

NEW never used adjustable track bar from SKY Manufacturing for an OBS truck. I don't have the bushings for it but they are >$15 from several vendors. $100 shipped

Installing this bypass system has been a long time coming and I probably should have done it years ago. My intent was not so much to stretch out the oil change interval - I'm already getting 10K out of the Schaeffer 5-40 - but to keep it cleaner longer. There are all sorts of oil bypass...

Way back when I installed my intercooler I also modded the CCV so it wouldn't foul up the system with oily vapors. For years it vented to the atmosphere, zip tied behind the front cross member. I was always annoyed by the white vapor that came from it, especially in summer. Some folks...