Search results

Can anyone recommend a rear entertainment system for my 2000 Ex?Something that doesnt interfere with the rear HVAC controls would be nice. It would be easier if the HVAC controls for the rear were actually on the center console as opposed to the headliner. Anyone have pictures of their setup?

Im looking for individual H-11 studs. 2 to be exact! I would like to have a spare just in case. One stud out of my set has what appears to have a little corrosion on it and would like to swap it out. Probably will never ever need the one but just in case. Any vendors still have some?

Has anyone tried the oil tank gasket Riff Raff is now selling? I am a click away from ordering it! Just wondering if anyone has tried it yet!

Hey guys, was wondering how the transmission work was coming. My Excursion is coming due!

Looking for a roof rack for the Ex. Does anyone recommend one brand or type over the other? Would like to put some lights on it in the future as well!

Finally getting close to the end of my motor swap (PMR to Forged) and my wife tells me to get a cam! Theres more to that story but yes she did! Got to thinking about my turbo. Im running an H2E, not modded with the following other mods: FFD 250/200s DI Regulated Return Gearhead Cam Stg 1 910...

Posting this for a buddy of mine. Trailer comes as is with a fifth wheel adapter as well. Chains, straps, tool boxes, winch, LEDs and binders included as well. Asking 9k. Negotiable. Located in 28454 zip. Please PM me for his contact info. Also has a 1st gen Dodge with a Cummins for sale as well.

Posting this for a buddy of mine. Came off of a 2010 F450 SRW. Hes asking 5k firm. No rust! Located in North Carolina, zip 28454.

Anyone mod their fuel fill port to accept the larger nozzles? Will a super duty port work? Curious if anyone has modded theirs. I get antsy when I'm waiting for a small nozzle and all the large nozzle pumps are open!

When resealling an oil pan, what is the proper way? I know motor upside down, apply motorcraft rtv to block. Is it better to wait a few minutes or install pan right away? Let pan sit on rtv for a bit or torque right away? Would like to do this once!

Putting my motor back together and I'm curious if the lifters are supposed to be installed a certain way. I wrote down how they came out. The oil holes were facing the same way on one side but on the other side it was different. So does it really even matter?

Will rear springs from an 08 F250 work on an excursion? Did some looking and the info for this swap is pretty scattered. So let's try this, those that know, what year parts will work on the excursions? Years and model for front springs? Years and model for rear springs? Years and model for...

Im looking for a new turbo pedestal for my H2E setup. The pedestal I'm running now has an o-ring groove machined in the center of the hole for the oil drain. Oil drain is a flex tube that gets pushed in the hole and rtv sealed around it. At first I thought nothing of it when I installed it a...

Is there an alternative to swapping rear excursion springs with super duty springs? Like aftermarket springs that offer the same ride quality and slight lift as the super duty truck springs. The front already has the super duty springs, just need to do the rears. Front feels solid but the rear suxs?

Does anyone know where I can find a wiring diagram from the 42 pin connector to the injectors? I have a truck with a pigtail change gone bad!!

Im getting ready to swap out my PMR motor for a forged rod motor due to a bad lifter. So I decided to take one apart from my forged rod motor and it had some nasty oil and crud in there. I in no way have money for new ones! So I took 2 more apart and cleaned them with some brake clean and...

Looking for the part number or specs for the plug that is used to cover the cam driven fuel pump port on the OBS motors. Putting an OBS motor in my 02 and need to cover that hole in the valley up.

Need to remove the passengers side head. #3 has low compression that I believe to be valve related. Anyone have any tips or tricks on how to remove it? Really dont want to pull the motor if I dont have to. Thanks!

Im doing some troubleshooting in regards to my other thread: http://powerstrokearmy.com/forums/showthread.php?t=40402 Thinking I may have an injector cup issue. When pressure checking the cooling system does the thermostat need to be out of the equation? I remember there being a vent hole on...

Running 250/200s. This started yesterday. Parked the truck on base for about an hour and a half. Came back out and fired the truck up. Nothing but white smoke. No odd sounds or engine shaking. Drove away and it cleared up. Truck still pulls hard! Got home around 4ish in the PM. Started it up...