Search results

Have a 2006 F250 with 191k on it that developed a slight miss under load. Truck has new ford injectors, ficm just reworked through ficmrepair.com, and fresh t6 oil with motorcraft filter. I'm leaning toward the harness being bad, but can't seem to get the miss to go away by wiggling around the...

I am having trouble with the steering on my 07 F250. Tire size is stock, and the truck has 131k on the meter. Sometimes when I turn the wheel to make a turn the wheel doesn't want to turn back easily. Today it happened again and after I got the wheel straight I was getting a lot of pressure on...

Pair of 7" LED combo spot/flood light I bought for a project and never used. $150 for the pair.

Got a new to me 2007 F250 a couple weeks ago. Through trial and error I found that my 4wd was not working when my hubs were in auto. When I lock them in "lock" the 4wd works fine. I hooked in a vac gauge after the solenoid and it goes up to 12in and holds for about 30 seconds until something...

I have my 95 F250 up for sale and have an issue with the o/d light flashing once in awhile when I drive it. The truck shifts good until the light blinks. Put my reader on it and got "P1711 Transmission Fluid Temperature Sensor Out of Self-Test Range" as the only code. Now what do I do?

I did a bunch of searching without out many answers to my question.... Truck has 193k on it and everything is original to my knowledge. The truck has a massive leak in the valley and I plan to tear out the bowl and rebuild it. I also plan the put new rubber hoses on. While I have everything...

1995 F250 auto with 193k miles. I bought the truck this spring from a local guy with a flashing OD light. I reset the light and it hasn't come on again. The transmission has less than 10k on a rebuild. Truck runs and drives good. Tires are 50% rubber- one tire is not matching but 50% rubber. Has...

I am working on my Dad's 97 F250 and I have discovered that he broke the part that goes from the shifting handle to the shifting cable. Can anyone tell me where to find this piece?

I am looking for the long piece that goes from the handle to the shifting cable. Let me know if anyone can help.

I have always felt like the steering on my F350 has felt loose and finally got around to looking at it yesterday. Had the wife turn the wheel left and right while the truck was on the ground looking for movement at the tie rods. I found that the tie rods don't move, but rotate up and down as I...

I just got done putting new manifolds on my 97 F350 and gutting all the EBPV stuff out. My question is can I just cap the sensor port on the passenger manifold, or do I still have to keep it? (The copper line is bad)

Is this wheel still good enough to run?

I plan on having my 97 F350 tore down in the next few weeks to fix up pipe leaks and exhaust manifold leaks. While I have the turbo out I thought about upgrading to a WW2. This truck is mostly used to pull and has a 6 pos chip, straight pipe, and gauges and it otherwise stock. Think it is worth...

I have a blue cloth bench seat out of my 95 OBS. Drivers side broken down, but still very usable. Cup holder and flip down arm rest are good. Come and pick it up and its yours.

My oil cooler is leaking and I need gaskets. Is there any reason not to use Dorman gaskets?

Where is the best place to get a pipe kit from?

I have a 97 F350 dually with 113k miles, gauges, 6 pos chip, and straight pipe exhaust. About all I do with this truck is towing with loads up to 15k lbs. I have ran the chip for about a year and a half now, but I've never really been happy with heavy towing as I hit 1200* way too easy. This...

My brakes have not been working well on my 95 F250 for a long time. The brake pedal is soft and will continue to go to the floor as I brake making only the front brakes lock up if brake fast. (on gravel) When I took the box off I rebuilt the rear brakes thinking that was the problem. I put on...

Anyone know how to reuse my old fender emblems on my 95 F250? The back is not flat and I am scared that 3M tape will not stick it to the fender.

My truck will run for about 5-10 min when its cold then die like its starved for fuel. No check engine light. I replaced the fuel filter (which looked like it needed it) and have had slightly better results, but truck still starves out of fuel. would it help to take the screen out of the IPR and...