06 250 SD HVAC Auto Issues

Marcus

New member
Joined
Dec 17, 2023
Messages
6
Reaction score
0
Location
Port Clinton , Ohio
Ran the EAT test and my auto hvac control did not respond has intended, there was no "dashing light " running around the lcd display , when ending/exiting the test the fan ran on high regardless of which mode the system was set to then went back to normal mode after a few days, in auto mode never has worked where u set the temp and the system takes over, manual function of the system works thru the hvac controls, the fan and temp work thru the wheel but not mode, the vaccum heat shut off valve does not function even though the vaccum system is in working order, turn system on for heat only and the ac comes on at the sametime, parts replaced: HVAC temp control sensor, temp control actuator, flushed the heater core......
with all these issues am thinking the actual hvac control i the dash maybe bad since I could not perform the EAT test .... anyone have the same kinda issues and it was the hvac auto climate control ?
 

6.0 Tech

Well-known member
Joined
Sep 9, 2015
Messages
3,704
Reaction score
204
Location
Mesa, AZ
The units are fairly unreliable. Replaced quite a few of them. Unfortunately, now you can only get dorman ones, and theyre not cheap.
 

Marcus

New member
Joined
Dec 17, 2023
Messages
6
Reaction score
0
Location
Port Clinton , Ohio
The units are fairly unreliable. Replaced quite a few of them. Unfortunately, now you can only get dorman ones, and theyre not cheap.
HI so the way the auto climate control is acting , it is in the control for sure ? Thats what I thought but just in case it was another sensor could be making the control act up ...
 

6.0 Tech

Well-known member
Joined
Sep 9, 2015
Messages
3,704
Reaction score
204
Location
Mesa, AZ
99% sure it’s in the control head. As far as the steering wheel control goes, that may be unrelated, but I’d fix the control head before messing with that part.
 

Members online

No members online now.
Top