12" wide tire on a 12" wide wheel

[bigaF250]

Does anybody have pictures of a 12" or 12.5" tire mounted on a 12" wide wheel? I'm staying stock height and wanting to go with a 20x12 wheel with the nitto terra grappler 305-55R20. Tire measures out around 33.2 tall and 12.4 wide. I know its possible, just don't want a huge wheel bulge or tire lip failure as I tow frequently

 

[bigaF250]

Also any pictures of 20x12s -44 on a stock height truck.

 

[smokinstroker]

There's a whole thread on this

 

[JAP]

 

[MINK]

Here is the thread..

http://powerstrokearmy.com/forums/showthread.php?t=25783

 

[Jonnydime]

I would go 10" wide with that tire. Here is a pic of my truck with a 20x10 -12mm and 305/55R20's. Stock height in the front -3" in the rear.

I don't think it will fit with out some major trimming. Here is the same truck with a 18x10 -25 and 325/60R18's. I am lowered about 1.5" but you would be adding an extra inch to each side of the wheel plus the extra offset.

 

[MINK]

33x12.50 will fit with zero rubbing on a 20x12 - been there, done that.

 

[Jonnydime]

33x12.50 will fit with zero rubbing on a 20x12 - been there, done that.

You had full suspension movement with no rubbing?

 

[bigaF250]

I've run the 20x10. Not interested. I really like the look of the 12 wide. Thanks guys. And yes I was sure there was already a thread somewhere but didn't want to search for days for it

Sent from my SCH-I545 using Tapatalk

 

[florida 6.0]

Do it , love the look of 12's on a 12 .

 

[BIGDECK87]

I have 20x12 -44 on my 04 with 33/12.50 Toyo MTS. I'm running a 2.5" leveling kit and it rubs in a hard turn.

Sent from my DROID RAZR using Tapatalk

 

[MINK]

You had full suspension movement with no rubbing?

08s have big wheel wells dawg.

 

[Jonnydime]

Well that sucks. I didn't pick up those 18x12 Welds in the for sale section because I didn't want to do any trimming or cutting.

 

[smokin99stroke]

I have 20x12 -44 on my 04 with 33/12.50 Toyo MTS. I'm running a 2.5" leveling kit and it rubs in a hard turn.

Sent from my DROID RAZR using Tapatalk

Does it rub the leafs?

 

[BIGDECK87]

Does it rub the leafs?

Na rubs the inner fender on the back and almost catches the bumper valance

Sent from my DROID RAZR using Tapatalk

 

[brian89]

I have 20x12 -44 on my 04 with 33/12.50 Toyo MTS. I'm running a 2.5" leveling kit and it rubs in a hard turn.

Sent from my DROID RAZR using Tapatalk

im going to be doing a similar set up but i dont know if i can bring myself to going with a 33 instead of a 35, but ill need at least 4" of lift to clear the 35's on 18x12's with a -44 offset

 

[BIGDECK87]

im going to be doing a similar set up but i dont know if i can bring myself to going with a 33 instead of a 35, but ill need at least 4" of lift to clear the 35's on 18x12's with a -44 offset

Yea I done a lot of studying in the wheel/tire thread before I ordered my setup.. a lot of trucks set up different ways.. was going to do a 4" and 35s with my wheels but pulling a gooseneck didn't see it logical to so when its not off road much

Sent from my DROID RAZR using Tapatalk

 

[smcox1]

I would go 10" wide with that tire. Here is a pic of my truck with a 20x10 -12mm and 305/55R20's. Stock height in the front -3" in the rear.

I don't think it will fit with out some major trimming. Here is the same truck with a 18x10 -25 and 325/60R18's. I am lowered about 1.5" but you would be adding an extra inch to each side of the wheel plus the extra offset.

What kind of lights are in your bumper?

 

[bigaF250]

Just pulled my leveling kit off so it's ready for 33s now

 

[swinky]

305 50 20
Sent from my SAMSUNG-SGH-I537 using Tapatalk 2