1996 F350 4WD Part out

[Big Calo]

Have a 96 F350 I'm parting out. Truck has 365K miles on it, blew the engine, so I'm parting it out. Body and interior are not to good, but should still have good acessories on it. Let me know what you are interested in and I can take a picture of it, and make me an offer. Engine, transmission, wheels and tires, are already spoken for. Front end has new Warn hubs and repacked bearings, but will need axle seals. Everything else is available.

I can cut the gooseneck hitch off. I don't have the ball, but it is a screw in type. the plate is about 1" x 12" x width of frame rails.

Fuel tanks are good.

Radiator, brakes, rearend, under hood accessories, ect, are all good. I had been driving the truck for about 6 months from work and back, and even took it on a 18 hour round trip once.

I started the flatbed and got as far as you see. The back bumper is 4" x 16" x 3/8" rectangle, and the rails are 2" x 4" x 1/4" rectangle, and cross pieces are 4" channel, and will bolt up to factory holes. Would like to get $300 for that just to cover material.

Make offers on what you want. I'm not going to let it sit around and rust. Will scrap it out in a couple weeks to off set costs, of the replacement truck I got. Need it gone!

Thanks, Caleb

 

[molonlabe27]

Where are you located?

 

[Paul@CP_Trucks]

How much for the axle?

 

[Big Calo]

Where are you located?

Sorry, Central, Texas. 76556

How much for the axle?

$500 Front or rear. Got one supposedly committed on the front axle, but if I don't have confirmation by Friday its up for grabs again.

 

[Paul@CP_Trucks]

Lemme know

 

[ryanss22]

hood release cable and mechanism from inside cab to the under hood, shipping to 13459

 

[Lamont_24]

Do you still have the exhaust back pressure sensor? Or did that go with the engine?

 

[Big Calo]

Do you still have the exhaust back pressure sensor? Or did that go with the engine?

It can come off. I didn't realize that an OBS had one. Tell me where it is and how much you will give for it.

hood release cable and mechanism from inside cab to the under hood, shipping to 13459

Let me check to make sure its not broke anywhere. I know it worked, but want to make sure its not cracked.

 

[Lamont_24]

Do you know if it was working good before the engine blew? And it's by the hpop, has a little tube coming up between the altenator and the head

 

[Big Calo]

I assume it was. The engine ran fine when it blew.

 

[97Beast]

Where in Texas are you? What gears does the front axle have? And interior color?

 

[Big Calo]

Lemme know

Where in Texas are you? What gears does the front axle have? And interior color?

Front axle is sold.

Interior color is grey.

I'm located in Rockdale, Texas, about 60 miles south of Waco.

 

[97Beast]

No worries.

Could you grab some pics of the interior. I'm currently in College Station, so i could make it out to Rockdale pretty quickly to grab some interior pieces. I know i could definitely use the window switch bezel on the driver door, and a few other pieces. It could be worth the trip if see a few other good pieces in the pics.

 

[97Beast]

Also i may be interested in the passenger rear door if its dent free, and if the paint is in good shape.

 

[House]

DRIVERS SIDE HOOD HINGE? also need complete heater box on fire wall

 

[Big Calo]

hood release cable and mechanism from inside cab to the under hood, shipping to 13459

Hood latch assembly is in good shape. Looks like it may be a pain to get out, so I'll say $50 shipped.

No worries.

Could you grab some pics of the interior. I'm currently in College Station, so i could make it out to Rockdale pretty quickly to grab some interior pieces. I know i could definitely use the window switch bezel on the driver door, and a few other pieces. It could be worth the trip if see a few other good pieces in the pics.

Bezel is cracked.

Also i may be interested in the passenger rear door if its dent free, and if the paint is in good shape.

Door surprisingly is in good shape. Only obvious dent is pretty small. Right behind the front door key hole. Maybe you can see it.

DRIVERS SIDE HOOD HINGE? also need complete heater box on fire wall

Hinge is available, the stop has been bent over from the wind catching catching it, but I believe it can be straightened out, and be fine.

Heater box also looks fine. Again it looks somewhat difficult to remove, so I'll say $70 shipped for both items.

If you see ANYTHING you may want make me an offer. I just kind of look at it as how long does it take to get said part off. About a dollar a minute is what I figure, then depending on how old the part is (i.e. original vs recently replaced). Just want it to be worth my time.

Few other thing that may interest someone:

turbo
pedestal
uppipes
harnesses
hoses
sensors
drive shafts
transfer case
door handle
windows
starter
altenator (rebuilt ~6 months ago -$80+shipping)
IDM
PCM
The engine is only wanted for mock up, so the only thing really needed on it is the manifolds and valve covers.

Things that are sold so far:

engine
transmission
front axle





This will go to scrap after a couple weeks. Also please keep all requests in this thread, so I can keep track as this is first come first served.

 

[Magnum PD]

Front fuel gauge sending unit? Mine has the plastic larger ring.

 

[Magnum PD]

Bump.

 

[Mad Max]

40/20/40 seat?

 

[Big Calo]

Bump.

Sorry, Magnum. The front sending unit was working. I'll have to get you a pic, if I can ever get home from work before dark.

40/20/40 seat?

It does, but they are pretty much wrecked.