Reply to thread

Message: [QUOTE="Djmck832, post: 1132733, member: 13218"] I've been wanting to change out my rusty rear diff cover for a year now and found a thread from another site posted last August. Here's my version... Decided to go cheap and found the 2008 OEM Aluminum cover at my local dealer. Here's a breakdown of cost... -'08 Cover # 8C3Z4033A - $59 -Rust-oleum High temp gloss paint - $5 -Rust-oleum High temp clear coat- $5 -Chrome bolts and washers - $25 at Home Depot -Already had Ultra grey gasket maker -Took OEM cover and etched the aluminum with vinager. Let dry. -Sprayed a nice coat high temp black, let dry 30 mins.... Did this three times. -Took some sandpaper I had laying around and stripped the fins. Didn't bother polishing the aluminum -Sprayed a nice coat high temp clear, let dry 30 mins.... Again, Three times. -Bolted up after proper gasket maker procedure. -Sprayed clear coat over bolts. Now if I could only figure out how to post more than one pic at a time... :fustrate: [/QUOTE]

Verification

Random media

front_axle_swap91

2011-12-17_20-21-05_276

women

ICP

clutch2

Fuel_Cell

Special preping cleaning soap.

IMAG0073

Backglass

10_8_2011_HPP_taken_by_Mark_Skalny

Da Pumpkin Truk Facebook Gem

Latest posts

10R140 failure
- Latest: PSD-BLACK-CLOUD
- Friday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- May 6, 2025
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- May 6, 2025
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- May 4, 2025
6.0 Aftermarket

Members online

DEEZUZ

Total: 473 (members: 1, guests: 472)

Top