365/60/20 with a 3” RC lift will they fit?

[SpyderX]

I think they are a little bigger than 35/12.5/20. Will these fit without wheel spacers with my current setup? If not what size spacers you guys recommend?


Sent from my iPhone using Tapatalk

 

[sootie]

I'm sure you mean 325 and no one should ever recommend wheel spacers

 

[SpyderX]

I'm sure you mean 325 and no one should ever recommend wheel spacers

Yes 325. My bad


Sent from my iPhone using Tapatalk

 

[threegenpowerstroke98]

I'm running those on a two inch taller front spring with 20x10 pro-comp rims with -12 offset and half inch wheel spacers. It rubs a bit even without my front mudflaps on. I should really be another two inches taller.

 

[SpyderX]

I'm running those on a two inch taller front spring with 20x10 pro-comp rims with -12 offset and half inch wheel spacers. It rubs a bit even without my front mudflaps on. I should really be another two inches taller.

I’m in a 2012 with 2017 20”

wheels. The driver side rubs a tad when fully turned so I think I would need spacers but I’m hearing those are bad news.


Sent from my iPhone using Tapatalk

 

[dadada]

No rubbing at all. 35x12.50-20's. 20x10 -18 offset. 2" leveling kit in front

 

[TrickTruck]

37" on a Icon leveling kit here. Trick is to get your offset right.

You want em sticking out ghetto fabulous w/ a bunch of offset then you need a big lift.

Mine are right even with the flairs and I get just a touch of rub on the mudflaps.

These are Ridge Grapplers in 37x12.5x22. My wheels are 22x10 w/ a -10 offset. Sticking way out is usually in the -40 range.

I want to put the 37x13.5x22 on there when I put new tires on, but I think I have to push the whole front end forward a smidge w/ a 3link kit. 13.5s also mean I can't fit it in the carwash anymore Probably going to cost me a bunch of mpg too.

Still want them