6.4 engine/parts for sale

[LReiff]

I have a complete 6.4 motor with approx 140k miles, in parts and pieces.


The block is damaged. All the pistons on the RH side have heat damage from bad injectors. The cylinder head from the RH side has visible cracks.

RH cylinder head, has visible cracks between valve seats. $50
LH cylinder head, no visible cracks. $250
Valve cover, pair. $75
Rocker box, pair. $75
Injector harnesses, pair. $40
Complete engine harness, ecm plug is missing the lock/handle mechanism but is still functional. $250
Crank. $350
Cam. $100
Injector, core set. $550
Pump, high pressure fuel. $250
Fuel rail set with injector lines and pressure sensor. $75
Twin chargers, bearings have minimal play. $650

Prices do not include freight however I can ship everything listed.
If you're looking for engine parts that are not listed just ask.
Text 7l7-44O-82O7 for more info.

 

[LReiff]

The engine had not locked up, I drove the truck into the shop.

Rockers, rocker pedestals and rocker bolts, both sides. $75
Push rods. $25
Belt tensioners and idler pulleys, look and feel ok. $75
Accessory mount bracket. $25
Up pipes. $25 each
Manifolds $25 each.

 

[TheReelMuhcoy]

I'll take both up pipes. Sending PM now.

 

[LReiff]

HPFP - Sold
Up-pipes - Sold
Turbos - Sold

 

[LReiff]

Cam - Sold
Intake manifold - Sold
Fuel Rails - Sold

 

[dstryr]

I'll take the full rocker assembly and the cracked head.

 

[dstryr]

text me

408-710-7306

 

[LReiff]

I sent a text over a week ago and got no reply! My number is in the first post. If you need something just send me a text and I'll get right back.

Still have

RH cylinder head, has visible cracks between valve seats. $50
LH cylinder head, no visible cracks. $250
Valve covers & Rocker boxes with gaskets and bolts. $100
Crank. $350
Connecting Rod set $200
Injector, core set. $550
Fuel rail set with injector lines and pressure sensor. $75
Rockers, rocker pedestals and rocker bolts, both sides. $75
Push rods. $25
Belt tensioners and idler pulleys, look and feel ok. $75
Accessory mount bracket. $25
Exhaust Manifolds $25 each.
Front cover, complete with oil pump gear. $300
Rear gear cover. $100
HPFP cover. $50
Oil cooler assy with filter canister and cap. $75
Turbo pedistal. $40
EGR cooler set. $50
Intake elbow with EGR valve. $50
Flexplate. $50

 

[LReiff]

Cleaning shop, considering all offers!

 

[Dzchey21]

How many miles were on this engine

 

[nuttcase21]

Got the block heater harness?

 

[TheReelMuhcoy]

Lee, I think I'll take those exhaust manifolds now. Make my life simpler with this project. Send you a txt tomorrow.

 

[Crack85]

How many miles were on this engine

140k

 

[Dzchey21]

Any verification the oil cooler was still efficient?

 

[LReiff]

No wire harnesses.

No idea on the oil cooler, it had gold coolant in it when we took it apart.

 

[ingrahams]

Sent you a PM lastnight on the rocker boxes and valve covers.
-Stew

 

[CT9AIX]

Is the core injector set still avaliable? If so where are you located? I noticed you have a 717 area code so I'm assuming your in PA?

 

[LReiff]

Thanks guys!

New list of what's left.

RH cylinder head, has visible cracks between valve seats. $50
LH cylinder head, no visible cracks. $250
Crank. $350
Connecting Rod set $200
Rockers, rocker pedestals and rocker bolts, both sides. $75
Push rods. $25
Belt tensioners and idler pulleys, look and feel ok. $75
Accessory mount bracket. $25
Front cover, complete with oil pump gear. $300
Rear gear cover. $100
HPFP cover. $50
Oil cooler assy with filter canister and cap. $75
Turbo pedistal. $40
EGR cooler set. $50
Intake elbow with EGR valve. $50
Flexplate. $50
Control actuator for VGT charger. $100


Additional 6.4 parts off a '10 motor with 41K miles.

Intake elbow with EGR valve, egr was disabled at 5k miles, clean inside. $150
Stock Twin chargers, no control actuator. $950 obo.
Pump for fuel/turbo cooler, with hoses. $100

 

[LReiff]

Turbochargers - SOLD

 

[Dzchey21]

I might have to take the rods