6.4 River City Diesel Ported Intake Manifold "NIB"

[kdsf350]

6.4 River City Diesel Ported Intake "NIB"

With Ceramic Thermal Barrier Coating From http://www.finishlinecoatings.com

$499.00 shipped

Reason for sale stock heads were cracked:fustrate: I purchased Elite Ported Heads and to take full advantage of their potential went with the Elite Z-max ported manifold for max airflow.

 

[sootie]

damn good deal for somebody...

 

[Morfael]

So very tempting...

 

[forcefed6.4ford]

Iirc. The manifolds are essentially the same. Run what ya brung.

 

[kdsf350]

Iirc. The manifolds are essentially the same. Run what ya brung.

You maybe correct but with the stage1x cam, oversize valves, and bigger turbos plus more fuel I will adding. I just didnt want to take a chance and leave some extra HP on the table because of lack of airflow. This is what I get for jumping the gun before the motor was torn down.

By the way head cracks were located in the valve seats and some from the golw plug hole to the valve seats just in case people were wondering.

 

[forcefed6.4ford]

What I'm saying is the performance between the two manifolds will be near identical. Both have the bridges removed. No need to sell.

 

[TD-5]

I believe this manifold is equivalent to Elites Z Max JR,( $500.00) only the inner post is removed the outer posts are still in there. Elite claims an average 5% gain in flow. The Full Z Max is ( $1300 ) & a 10% gain in flow claimed.

http://www.elitedieselengineering.com/product/14520003/Z-Max-Ported-Intake-Manifold/

http://www.elitedieselengineering.c...ax-Jr-Ported-Intake-Manifold-64L-Powerstroke/

 

[Derek@Vision Diesel]

Iirc. The manifolds are essentially the same. Run what ya brung.

What makes you say this? Any sort of real world results or just speculating?

 

[forcefed6.4ford]

Only so many ways to skin a cat. Short of building a whole new intake ie the zmax tunnel plenumn. Once the bridges are removed, not much else left.

 

[Powerstroked162]

Iirc. The manifolds are essentially the same. Run what ya brung.

What I'm saying is the performance between the two manifolds will be near identical. Both have the bridges removed. No need to sell.

I think you mean the z-max jr, BroDiMaggio

I believe this manifold is equivalent to Elites Z Max JR,( $500.00) only the inner post is removed the outer posts are still in there. Elite claims an average 5% gain in flow. The Full Z Max is ( $1300 ) & a 10% gain in flow claimed.

http://www.elitedieselengineering.com/product/14520003/Z-Max-Ported-Intake-Manifold/

http://www.elitedieselengineering.c...ax-Jr-Ported-Intake-Manifold-64L-Powerstroke/

You got it

.

 

[forcefed6.4ford]

Never heard of the jr until now. Carry on

 

[kdsf350]

Item Sold