Derek@Vision Diesel
New member
Well im going back to stock. Hate to do it, but its time to move on. I will be live tuning and dyno'ing this setup here in a little over a week.
I want to get things spoken for and deals made, then I can start pulling it apart and shipping stuff beginning of December.
All prices are + shipping and I need stock parts unless noted.
1996 F350 4x4 crew cab, 5" exhaust, ARP studs, electric fuel system. $10,000 OBO
1. 375/200 Hybrids built by Farmers. Fuel side mods. 50 miles on a fresh build, talk to Michael about details. $1550
2. T4i Irate complete mount (up-pipes, oil drain, feed line, all hardware) + 72mm Billet S300 with 19cm exhaust housing-- $1400 obo
3. Terminator Twins (will be sent to Joey for refresh)-- $1200 OBO
4. Swamps Modded IDM (high frequency+high voltage)- $200obo
5. 6.0 IC with IC piping. I will include 3" plenums and everything I used to install this kit. You may need to change the drivers side pipe to work with your turbo. - $300 nothing needed in return
6. 4 gauge pillar (boost (0-60), EGT (0-1600), Trans temp (0-280), Fuel pressure). Gauges match the green dash perfectly. DiPricol Optix brand
-$450 OBO
7. Terminator Scan gauge w/the column pod- $275 OBO nothing needed in return
8. TS 6 position chip w/tunes for TDE1- $300 OBO nothing needed in return
9. Chromoly pushrods- $150obo dont need stock ones
10. Custom sub box with 2 JL Audio W3's (10's), fits behind back seat of crew cab. make offer
11. Set of good forged rods- $100 no cores
12. Boost fooler (dieselsite)- $40 (1 week old)
I also have enough parts to build a stock motor, if your in need of something just ask. Im not going to post all the stock parts ive got laying around. I have 1 complete motor torn down and wrapped up nicely in boxes (my old motor out of my truck).
I would also be willing to do package deals, this is a 500-550hp setup and will be dyno proven on the 19th of this month.
Probably missed something, ill edit it later if i did
I want to get things spoken for and deals made, then I can start pulling it apart and shipping stuff beginning of December.
All prices are + shipping and I need stock parts unless noted.
1996 F350 4x4 crew cab, 5" exhaust, ARP studs, electric fuel system. $10,000 OBO
1. 375/200 Hybrids built by Farmers. Fuel side mods. 50 miles on a fresh build, talk to Michael about details. $1550
2. T4i Irate complete mount (up-pipes, oil drain, feed line, all hardware) + 72mm Billet S300 with 19cm exhaust housing-- $1400 obo
3. Terminator Twins (will be sent to Joey for refresh)-- $1200 OBO
4. Swamps Modded IDM (high frequency+high voltage)- $200obo
5. 6.0 IC with IC piping. I will include 3" plenums and everything I used to install this kit. You may need to change the drivers side pipe to work with your turbo. - $300 nothing needed in return
6. 4 gauge pillar (boost (0-60), EGT (0-1600), Trans temp (0-280), Fuel pressure). Gauges match the green dash perfectly. DiPricol Optix brand
-$450 OBO
7. Terminator Scan gauge w/the column pod- $275 OBO nothing needed in return
8. TS 6 position chip w/tunes for TDE1- $300 OBO nothing needed in return
9. Chromoly pushrods- $150obo dont need stock ones
10. Custom sub box with 2 JL Audio W3's (10's), fits behind back seat of crew cab. make offer
11. Set of good forged rods- $100 no cores
12. Boost fooler (dieselsite)- $40 (1 week old)
I also have enough parts to build a stock motor, if your in need of something just ask. Im not going to post all the stock parts ive got laying around. I have 1 complete motor torn down and wrapped up nicely in boxes (my old motor out of my truck).
I would also be willing to do package deals, this is a 500-550hp setup and will be dyno proven on the 19th of this month.
Probably missed something, ill edit it later if i did