79 F-150 supercab 04 6.0

Dzchey21

Active member
Joined
May 18, 2011
Messages
11,784
Reaction score
0
Location
wyoming
Some more little things check off the list this weekend

Power windows are working. They will just need wired up once I get the harness in the doors. I used a set of regulators from a 1990 ford bronco that I had laying around and modified them. Wasn't too bad first one took me 3 hours the next took me less than 30 minutes.

I cut a hole in the door for the keyless entry pad on the drivers side. All vehicles need these even if they are old lol.

Dash is almost ready to be permanently mounted just need a few more things and then I can dissassemble everything and undercoat and clear coat. I ordered a new door seals and window seals for the entire truck as well as a smooth one peice back glass. I also ordered a power door lock kit for these truck specifically and I'll make an attempt to wire them into the 04 harness so the key fob and door key pad work.

7BF6CBCD-D0BB-41B2-8C27-02AB88DC07AC.jpg
 

Dzchey21

Active member
Joined
May 18, 2011
Messages
11,784
Reaction score
0
Location
wyoming
Starting to make progress on this again
 

Attachments

  • IMG_2717.jpg
    IMG_2717.jpg
    655.9 KB · Views: 139
  • IMG_2721.JPG
    IMG_2721.JPG
    1.6 MB · Views: 128
  • IMG_2727.jpg
    IMG_2727.jpg
    629.8 KB · Views: 125
  • IMG_2729.jpg
    IMG_2729.jpg
    697.4 KB · Views: 146
  • IMG_2730.JPG
    IMG_2730.JPG
    1.7 MB · Views: 140

Dzchey21

Active member
Joined
May 18, 2011
Messages
11,784
Reaction score
0
Location
wyoming
Yeah life happens. We just built a house so that took some time away from the project. Now that summer is over and we are settled I can move along on it again.
 

78f100

Active member
Joined
Oct 25, 2011
Messages
2,367
Reaction score
0
Location
Bonifay FL
I love these trucks, 73-79s are the best. You have some skills for sure man. And that is a nice big shop, it it at your house?
 

Vader's Fury

Active member
Joined
May 18, 2011
Messages
3,302
Reaction score
1
Location
Chesapeake City, MD
Understand the life happens stuff. I took apart my 03 5 years ago and it is still in pieces. Moving, kids, etc really slow things down sometimes but the important things come first.
 

Dzchey21

Active member
Joined
May 18, 2011
Messages
11,784
Reaction score
0
Location
wyoming
The shop pictures are my dads place which is right next door to me. I wanted to get it out of his way and into my garage where all my tools and stuff are at. I hope to build a similar shop in two years.
 

gwunter

Active member
Joined
Jan 3, 2013
Messages
1,118
Reaction score
0
Location
Logansport, IN
I know where a couple old 70s supercab trucks are sitting. I'm tempted to make a move on them and perhaps build a puller out of one....with the mech 7.3 ive been messing with for the past 5 years. And I also aquired my dad's old 78 250 rclb....but it's a rusty pile right now. This thread wants me to get started on one. Lookin good.
 

Dzchey21

Active member
Joined
May 18, 2011
Messages
11,784
Reaction score
0
Location
wyoming
Thanks I love these trucks my first truck was my reg cab I've always wanted to sell it as a love hate thing but I can't do it.

Made a little more progress today. 04/79 radiator support mended together so the factory coolers will stack in correctly.
 

Attachments

  • IMG_2741.JPG
    IMG_2741.JPG
    1.4 MB · Views: 116
  • IMG_2740.JPG
    IMG_2740.JPG
    1.8 MB · Views: 131
  • IMG_2739.jpg
    IMG_2739.jpg
    726.4 KB · Views: 131

Latest posts

Members online

Top