DZL JIM
Member
Complete hub to hub Dana 60, with springs, track bar. Odometer showed 118k miles. Unsure of ratio, should know later this week.
Local pick-up only.
$650.
Local pick-up only.
$650.
-
1) What are you selling?
2) What is its condition?
3) Where are you located?
4) What is your asking price?
5) Pictures/videos?
6) At least 3 days between bumping your own ad.
7) No more than 5 ads per individual at once.
8) No commercial sales.
9) You must post when the item sells and state that it is SOLD. Do not report the post or PM moderators to remove your post once it is sold.
10) No feeler ads.
11) No firearms or firearm accessories.
'96 Dana 60
- Thread starter DZL JIM
- Start date
mattman347
Member
I need the springs!!! LOL
Yodersstrokin96
New member
ahhh!!!
LawnRanger
New member
Location?
John@Outlaw_Diesel
New member
Chardon, OH
DZL JIM
Member
30 miles East of Cleveland, OH, 44024.
DZL JIM
Member
Axle is 4:10. The one hub with no hub cover has a lot of rust inside, but that wheel actually spins freely. the other wheel with a Superwinch hub is near impossible to move by hand. I know it was freed up as the truck rolled and moved under it's own power. It could be a hub issue or maybe just the brakes are hanging up. I think the truck had not been run and moved in many years.
We took the diff cover off to see the ratio, and all the gears look good.
I'd be happy to open it up again for your inspection if you want.
We took the diff cover off to see the ratio, and all the gears look good.
I'd be happy to open it up again for your inspection if you want.
