96 F-250 SuperCab (2wd) 185k PART-OUT

[Copperhead]

I have a fairly clean, virtually rust free, southern truck that I've decided to Part Out.

I originally bought it with the intent of doing a full body-off-frame resto to it,.....BUT,....I found a low mileage truck that was ready to go,.....hence the reason for my sale.

I've parted out several F-150's (specifically 1st Generation Lightnings),....BUT,... this will be the first F-250 PowerStroke that I've done.

With that being said,....... If there's any items that you're interested in, let me know & make me an offer on the said item(s),....and we'll go from there.

I'm willing to ship every single part,....even the heavy stuff,....like the engine, trans, rear-end and etc,.... The only items I would NOT consider shipping would be body panels, bed, frame, fuel tanks and such,....

You can respond here, via PM on the forum.....
OR,.....
email me at [email protected]

OR,...
Call / Text 606-477-7327

 

[flstroker34]

How much for seat


Sent from my iPhone using Tapatalk

 

[Copperhead]

How much for seat

$250 for all,....including the center Jump Seat.



+ shipping,......of course.

 

[bluedge8]

How much for the wiring harness from the ecm out to the engine, assuming it is in good shape at the ecm connection.

 

[Copperhead]

How much for the wiring harness from the ecm out to the engine, assuming it is in good shape at the ecm connection.

$125 shipped (Cont 48 ONLY)



The harness is in perfect condition.

 

[ncollins64]

Are the doors rust and dent free? Was it an xlt with power windows and locks? What about the bed being in the same condition? Glow plug module in the dash?

 

[rpm-inc]

$125 shipped (Cont 48 ONLY)



The harness is in perfect condition.

I would be interested if blue isnt. Need the gpr bracket also. Let me know if he doesnt want it. Thanks.

 

[bluedge8]

$125 shipped (Cont 48 ONLY)



The harness is in perfect condition.

Sending you a pm

Sent from my SM-G920V using Tapatalk

 

[ncollins64]

Also the auto trans harness and the steering column?

 

[Copperhead]

Are the doors rust and dent free?

The doors appear to be rust free,.....BUT,... the drivers door has a dent about twice as big as a quarter, near the edge, close to the key hole area.

Was it an xlt with power windows and locks?

Yes,.....It's an XLT model w/ Power Windows & Locks.

What about the bed being in the same condition?

The bed is in decent condition, BUT,.... It does have a scrape on the right side over the wheel-well. Not bad though. If you zoom in on the pic you might be able to see it.

Glow plug module in the dash?

Yes,...... all of that is still intact.

Also the auto trans harness and the steering column?

Yes,..... Still available.



Column (complete) - $100
Auto Trans Harness - $50
Bed - $400
Tailgate - $100
Doors - $100ea,...... OR,....$175 for both

These prices DO NOT include shipping. BUT,.....There's no shipping on the big items like the Bed or Doors anyway.

 

[Copperhead]

Need the gpr bracket

$25 shipped

 

[Copperhead]

Also the auto trans harness and the steering column?

I removed both of these yesterday. Let me know if you're still interested.

 

[rpm-inc]

$25 shipped

Engine harness is sold? How about the rear tank fuel pick up assembly? Horn pad?

 

[Copperhead]

Engine harness is sold? How about the rear tank fuel pick up assembly? Horn pad?

Yes, ..... I shipped the main harness out today.

The horn pad is available and in good condition. Switches are functional and nothing is cracked or torn.
$45.00 shipped

I'll have to check on the rear tank pick-up assy, as I pulled the tank a while back. I can't remember the condition.
.
.
.

Sent from my SM-G900R6 using Tapatalk

 

[csxpaid]

how much for the front spindles with backing plates? Coil Spring towers?

What are the condition of these items?

 

[Copperhead]

how much for the front spindles with backing plates? Coil Spring towers?

What are the condition of these items?

The spindles are spoken for and the backing plates are junk. I swapped those out to another truck I had.


The Coil Spring Buckets / Towers appear to be in good shape. No rust or rot present.

 

[Copperhead]

Items that have been SOLD

The following parts are SOLD,.....

Bed
ECM / Computer
Main Engine Wiring Harness

 

[csxpaid]

how much for the coilsping towers?

 

[Copperhead]

how much for the coilsping towers?

Well,......
After seeing what aftermarket ones go for (EX: LMC lists them for 70 ea), I would let the pair of these go for $50

Shipping would be a flat rate of $20

My PayPal is [email protected]


I can remove them this weekend,....and ship out on Monday. Tracking # to follow by 9am that same day.


Let me know,....

 

[rpm-inc]

Yes, ..... I shipped the main harness out today.

The horn pad is available and in good condition. Switches are functional and nothing is cracked or torn.
$45.00 shipped

I'll have to check on the rear tank pick-up assy, as I pulled the tank a while back. I can't remember the condition.
.
.
.

Sent from my SM-G900R6 using Tapatalk

You get a chance to check out the rear tank sender?