Reply to thread

Message: [QUOTE="97BambiBasherPSD, post: 1006558, member: 1278"] Well the time has come for my PSD to be pulled out and cummins to be dropped in. I just picked up a 2000 24v out of an F650. It's a solid motor needs going over to check everything. I already have a p-pump cover for it. [ATTACH]28680._xfImport[/ATTACH] This is what it's goin in. The plan is to either run a NV4500 or NV5600. Which ever I can get a hold of. Modded 160 or 215 p-pump Head studs, valve springs, bigger cam, girdle, bigger fuel lines Still not sure on injector size but looking at 5x.20, 5x.24 or 6x.24 sticks If it needs pistons I'll drop the compression on it Turbo will be either a 75mm to start as a single or do a 66mm/HT60 combo and see where that leads to. My goal is to make 800 minimum fuel only and once that had been achieved and all the bugs are worked out I'll shoot for even more. [ATTACH]28681._xfImport[/ATTACH][ATTACH]28682._xfImport[/ATTACH] It'll be slow progress but I plan on having updates every week at least. Any suggestions are welcome as well! Now to parts I'm looking for A 160 or 215 p-pump Dodge NV4500 or NV5600 trans And some turbos Sent from my Pear phone 5 using Tapatalk [/QUOTE]

Verification

Random media

SHAQ

2011-07-23_13-19-32_1

axle_ratio_tag

20170417_142706

UNDER_HOOD_FUSE_PANEL

Vac Line 2

20140613_111850

IMG_20170708_175756822_TOP

ICP_Flat

Complete

Latest posts

Won’t start issues
- Latest: psduser1
- Yesterday at 8:30 PM
7.3 Tech & FAQ
Windshield washer fluid reservoir
- Latest: psduser1
- Yesterday at 8:27 PM
7.3 Tech & FAQ
F-250 & F-350 gear ratio question ?
- Latest: Mark Kovalsky
- Yesterday at 6:57 PM
6.7 Tech & FAQ
Y
2001 Ford F350 7.3 l powerstroke diesel windshield washer fluid reservoir
- Latest: Yojih123
- Yesterday at 12:15 PM
7.3 Tech & FAQ
s364.5
- Latest: htsummers22
- Saturday at 10:54 PM
Want to Buy

Members online

No members online now.

Total: 646 (members: 0, guests: 646)

Top