Reply to thread

Message: [QUOTE="STRAIGHTSTROKEN04, post: 729240, member: 3430"] I had a issue with my truck not starting hot a while back so I went ahead and did stand pipes and dummy plugs and that didnt fix it. Had the computer hooked up and everthing was fine while it was running, shut the truck off and it wouldnt start till the motor cooled back down. So next was pulling the injectors where we found the top o ring of the injector was broken or was torn. Replaced all the o-ring on every injector and put everthing back together. Ran fine until about 6 months later started to long crank then fire, then one day would crank but no fire... Pulled it back down and noticed that one of the top o rings was ripped... I had herd about the o rings in the oil rail going back causing that nipple looking piece to mess the o-ring up. Replaced all those and all new o rings again on the injectors and put back together no issues yet. Not that this is the case with your truck but just figured that i would give you what i have delt with.... I havent herd of many people replacing oil o-rings to help there no start issue. Hope you figure out your problem [/QUOTE]

Verification

Random media

99.5 7.3

OBS Fleet

100509_100749

IMAG1090

lift

4wheeler

39092_1458258350677_1659931355_1101771_1790729_n

022

1000_yards-Spotter

Latest posts

10R140 failure
- Latest: PSD-BLACK-CLOUD
- Friday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- May 6, 2025
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- May 6, 2025
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- May 4, 2025
6.0 Aftermarket

Members online

DaveinIowa

Total: 900 (members: 2, guests: 898)

Top