Reply to thread

Message: [QUOTE="TrailerHauler, post: 313410, member: 144"] I wanted to see what kind of input I could get on here before I took the time to get a hold of BTS and bug them with my questions. I've recently purchased an E4OD BTS from a 97 powerstroke, this will be going in my 99 with a PCS. I've talked to a few about bolting the trans in as an E4OD and running a PCS, and was told to add the few sensors it is missing to make it a 4R100 so that I can use the full potential of the PCS. Now what I'm wondering is what I need to add to make this a 4R100? I know the 4R100 has a sensor in the tail housing, and the tail housing on my BTS has that hole plugged with a nylon plug that pops right out. It looks like I can pull that plug out and pop that sensor right in, but is there another sensor I'll be missing after putting that one in? Here's a picture of the plug that pops out of the tail housing to make way for the sensor. [ATTACH=full]84655[/ATTACH] [/QUOTE]

Verification

Random media

2012-11-03_18-01-21_621

Picture_644

eng_fx_048

AC gauge

1108140832

9B8BAA5C-3D22-4387-A0ED-6BE6E6E957FB

574

TS_Agri_power_front

Latest posts

T
B&W hitch and shock removal
- Latest: TexMac
- Yesterday at 2:48 PM
2017+ 6.7 Aluminum Super Duty
6
ISSUES WITH CHOATES WARRANTY
- Latest: 6.7powersmoke
- Yesterday at 2:12 PM
1999-2015 Superduty Series General
Truck slipping into 4th
- Latest: Sterling6.7
- Friday at 7:18 PM
6.7 Tech
Do not recommend Choate Engineering
- Latest: DEEZUZ
- Apr 23, 2025
Newly Enlisted
A few turbo questions and a rant
- Latest: ghohouston
- Apr 23, 2025
7.3 Aftermarket

Members online

pooter

Total: 576 (members: 2, guests: 574)

Top