Buzzing from drivers kick panel

Pmac21

New member
Joined
Oct 19, 2011
Messages
539
Reaction score
0
Location
Holly Springs, MS
Ok so the first time I noticed this was on easter sunday I put my truck in 4x4 and I heard a buzzing sound coming from around my ebrake. I didn't think much of it but here recently I have been hearing it when I turn my key on to let the glow plugs warm up. It also still does it when I engage the 4x4. Any suggestions? Its either coming from under the truck close to my feet or near the fire wall. Thanks for any help in advance!
 

WoodBoy

New member
Joined
May 23, 2011
Messages
1,894
Reaction score
0
Location
Alabama
Vacuum pump. It should always do it right when you start the truck for a few seconds (30 seconds maybe). No specific time. Same thing for 4x4 since your hubs are vacuum operated
 

Pmac21

New member
Joined
Oct 19, 2011
Messages
539
Reaction score
0
Location
Holly Springs, MS
That makes sense. But why would it be so loud all of the sudden? Its loud enough to hear with the door open and the truck running.
 

Pmac21

New member
Joined
Oct 19, 2011
Messages
539
Reaction score
0
Location
Holly Springs, MS
Just got home and checked the pump. The screw that holds it down was backed out. Thanks again guys. That sound was about to drive me crazy!


Sent from my iPhone using Tapatalk
 

Tarheel_6.4L

Member
Joined
Jul 27, 2011
Messages
42
Reaction score
0
Location
Memphis, TN
I'm having the same issue but the vacuum pump stops buzzing when I disconnect the electrical plug. What exactly does the electrical plug control???
 

webb06

Active member
Joined
Aug 14, 2012
Messages
3,891
Reaction score
10
Location
Seneca, MO
I'm having the same issue but the vacuum pump stops buzzing when I disconnect the electrical plug. What exactly does the electrical plug control???


Provides power for the pump to create the vacuum. If it's running constantly you have a vacuum leak somewhere. Most likely on of the plastic lines has broke


Sent from my iPhone using Tapatalk
 

Tarheel_6.4L

Member
Joined
Jul 27, 2011
Messages
42
Reaction score
0
Location
Memphis, TN
Thanks webb06. Will it be ok to unplug it until I can have it repaired? I just had my radiator replaced so I'm thinking a line may have been damaged. It constantly buzzes and it's very annoying.
 

sootie

Well-known member
Joined
Oct 3, 2012
Messages
11,849
Reaction score
35
It would be best to disconnect it so it doesn't burn out
 

webb06

Active member
Joined
Aug 14, 2012
Messages
3,891
Reaction score
10
Location
Seneca, MO
Thanks webb06. Will it be ok to unplug it until I can have it repaired? I just had my radiator replaced so I'm thinking a line may have been damaged. It constantly buzzes and it's very annoying.


Probably so. Ya just unplug it


Sent from my iPhone using Tapatalk
 

TD-5

Member
Joined
Sep 12, 2013
Messages
282
Reaction score
2
Location
British Columbia Canada
If the Rad was recently out, check the vacuum line that runs over the top of the Rad to the vacuum switch.
 

Attachments

  • IMG_1484.JPG
    IMG_1484.JPG
    614.5 KB · Views: 60
  • IMG_1481.JPG
    IMG_1481.JPG
    783.9 KB · Views: 61

SlowSmoke

New member
Joined
Dec 15, 2011
Messages
197
Reaction score
0
Location
Sylvan Lake, AB
^^^^ what he said. Also there is a connection right beside the pass side battery along the plastic box under the positive cable. It's about half way between the two posts right beside the a/c port.
 

Latest posts

Members online

Top