Reply to thread

Message: [QUOTE="CurtisF, post: 486414, member: 829"] Well after many delays, finally got my truck fixed and the new boots put on. I had 3 boost leaks that I found. Two at the boots (one coming loose, another sliced and tearing). The third leak was at the passenger's side plenum. I could see traces of some of that oily residue coming out of the plenum base. Sure enough, when I pulled it off, there was an inch and a half strip that had popped loose some time ago, and it was covered in oily residue. Also found an oil leak and a fuel leak, both fixed now. While everything was apart I decided to delete my CCV mod and returned it to stock. It was trapping some oil, but not all, so I figured it was a waste of time. I've always had oil coming out of the CCV since I first did that mod many years ago. Moved it to a trap to keep oil from dripping, now I'm back to stock. Just got tired of messing with it. New boots holding well so far. Took it out for a test drive and ripped it. Much snappier response, boost comes up quicker, lower EGT's, and less smoke. Fair to say my job here is done...... for now. [/QUOTE]

Verification

Random media

2008 6.4L pic12

eleanor_part_two_31_

2008 F250

Misc_041

2012-07-17_21-49-00_441

eleanor_part_two_17_

IMG_20110903_1824331

eleanor_part_two_20_

IMAG0078

IMAG0322

Latest posts

Gauge cluster face plates
- Latest: crash86
- Yesterday at 5:15 PM
6.0 Aftermarket
B
6.4 head gasket job cost
- Latest: bowhunter
- Yesterday at 2:07 PM
6.4 Aftermarket
S
6R140 surging issue
- Latest: Smokin 6.0
- Yesterday at 12:11 AM
6.7 Tech & FAQ
Won’t start
- Latest: psduser1
- Wednesday at 11:33 AM
7.3 Tech & FAQ
GT37 Turbocharger w/10 blade turbine, billet comp.
- Latest: hskfab
- Jun 6, 2025
Engine and Drivetrain

Members online

dieseljohn76

Total: 338 (members: 1, guests: 337)

Top