Reply to thread

Message: [QUOTE="neverkickn, post: 569336, member: 718"] I have done some searching around this weekend and I think I am going to modify a fuel filter head for air removal. In Tarm's fuel system thread on PSN he alluded to the fact that a fuel filter head could be used to trap air, and that the FASS system wasn't that complicated on the air removal side. I looked at the FASS flow chart and sure enough, I think I can drill and tap the center of the filter head and run a pickup tube down to the bottom of the filter. I would use the new port on the top of the filter head for the fuel supply and repurpose the old feed port coming out of the side as a return back to the tank for aerated fuel. This would enable me to remove some entrained air while at the same time keeping the pressure from building in front of the lift pump so as to increase it's lifespan. [/QUOTE]

Verification

Random media

Screen_shot_2012-01-29_at_8_37_29_AM

IMG00073-20110224-1350

293941_214215245304283_100001474272705_597994_1362671332_n

20170502_2124271

my old 6.0 after mom drove it

IMG_20140102_123229

The bumper

Truck stereo powered by 6 McIntosh amplifiers @ 2,400 Watts in 4 ohms

Latest posts

02 F250 7.3 Will crank, WTS stays on, no start, no OBD
- Latest: Sterling6.7
- Today at 9:04 PM
7.3 Tech
2015-2019 6.7 HPFP New In Box
- Latest: lincolnlocker
- Monday at 1:26 PM
Engine and Drivetrain
First 6.0L (56k warning)
- Latest: adrianspeeder
- May 26, 2026
6.0 Tech
Extra external motor oil cooler?
- Latest: justinlogue5_0
- May 26, 2026
7.3 Tech
Weird Electrical Issue
- Latest: justinlogue5_0
- May 26, 2026
7.3 Tech

Members online

No members online now.

Total: 511 (members: 0, guests: 511)

Top