Lang
New member
- Joined
- Sep 10, 2012
- Messages
- 774
- Reaction score
- 0
What did you guys use to turn it down? been advised to put a small piece of hose off housing then put a elbow in then run it down the frame
I took the dog house off, turned it around and just put a pioece of hose on it.
I did the same thing.
You may want to replace the orings on the dog house while you have it off, they are cheap and tend to leak.
I thought the heater hose deteriorated?
I thought the heater hose deteriorated?
I did mine similar to what Arisely has stated. I turned the little doghouse around, put about 2" of hose, then took a 90* fitting and went up over the brake master cylinder down underneath the truck. After a while I got sick of the smell so I put a catch can under there and rerouted it back to the intake. Here are a couple pics...
Where did you get the catch can. Need to do this to mine.
Sent from my NookColor using Tapatalk 2
:whs: do you get any oil back into the intake?
So who's running it up over the master cylinder compared to running it straight down then along the frame and why?