EGT question

jr1993

New member
Joined
Oct 24, 2011
Messages
85
Reaction score
0
Location
ohio
I'm not sure if this is a problem or not but it got me wandering, my EGTs run pretty low. By low i mean i was pulling a featherlite cattle trailer its a tandem axle bumper pull one, so its not very large. As i pulling it I flipped my TW chip to the hottest tune i had and my EGTs never even got over 800 degrees, even when i was getting on it hard they never got very hot. Even without the trailer i rarely see them past 700. Just wandering if this is good or bad, if it helps i have my probe right after my turbo.
 

01 blue 7.3

New member
Joined
Oct 17, 2011
Messages
305
Reaction score
0
Location
illinois
My probe on my SD is in the exhauste manifold and 700-800 is about normal for driving/pulling down the road.
 

Arisley

Moderator
Joined
May 18, 2011
Messages
9,380
Reaction score
26
Location
Arlington, Texas
The probe needs to be in an exhaust manifold.

Mine will sit at about 500 cruising down the road at 66. I can make it hit 1500 pretty much at will though.
 

jr1993

New member
Joined
Oct 24, 2011
Messages
85
Reaction score
0
Location
ohio
i figured it might have to do with it being after the turbo but i wasn't sure thanks.
 

Latest posts

Members online

Top