Flounder_Pounder
New member
Put on Skyjacker rear add-a-leaf and got a to much lift... I what the heavier spring setup just a little to much rake... Looking to the F250 4X4 blocks.
Travis
Travis
-
1) What are you selling?
2) What is its condition?
3) Where are you located?
4) What is your asking price?
5) Pictures/videos?
6) At least 3 days between bumping your own ad.
7) No more than 5 ads per individual at once.
8) No commercial sales.
9) You must post when the item sells and state that it is SOLD. Do not report the post or PM moderators to remove your post once it is sold.
10) No feeler ads.
11) No firearms or firearm accessories.
F250 OEM (2" Blocks)
- Thread starter Flounder_Pounder
- Start date
Buck1
Active member
Might have a set at home, will check tonight.
Sent from my SCH-I545 using Tapatalk
Sent from my SCH-I545 using Tapatalk
sootie
Well-known member
- Joined
- Oct 3, 2012
- Messages
- 11,843
- Reaction score
- 35
i've got some if need be...
josh@thedieselcartel
New member
I also have some with u bolts.
Buck1
Active member
Found mine, with U-bolts as well.
Sent from my SCH-I545 using Tapatalk
Sent from my SCH-I545 using Tapatalk
Flounder_Pounder
New member
Thanks everyone,
I ended up buying some from "dlzdoctor" and they should be here soon.
This on my 99 F350 with a 2" SuperLift leveling kit, with a rake of about 1" but I needed\wanted some more since when pulling the horse trailer or another trailer that's a bit heavy I'd get a rear squat that I didn’t like. So I put on a Skyjacker R300HD add-a-leaf (3.5”) lift that everywhere I read said I’d only get an each or so… Well I got the full 3.5” and a rake of 4.5”+/- is a little much and with the 2” shorter blocks it gives me +1.5” and the existing 1”.
ps The ride is fine if not better as far as sway goes
I ended up buying some from "dlzdoctor" and they should be here soon.
This on my 99 F350 with a 2" SuperLift leveling kit, with a rake of about 1" but I needed\wanted some more since when pulling the horse trailer or another trailer that's a bit heavy I'd get a rear squat that I didn’t like. So I put on a Skyjacker R300HD add-a-leaf (3.5”) lift that everywhere I read said I’d only get an each or so… Well I got the full 3.5” and a rake of 4.5”+/- is a little much and with the 2” shorter blocks it gives me +1.5” and the existing 1”.
ps The ride is fine if not better as far as sway goes
