failing HPOP

lincolnlocker · Mar 7, 2014

What recent graphs show that the t500 doesn't hold better pressure?

live life full throttle

TyCorr · Mar 7, 2014

Your face

m j · Mar 7, 2014

LoL
"better pressure"??
who would give a rats ass about better pressure? I want the pressure that the programming is calling for.

if all you want is "better pressure" then you could probably get it by unplugging a couple of injectors so they dont use any oil

m j · Mar 7, 2014

lincolnlocker said:
Now I have never seen a direct comparison between a healthy/new oem hpop and the t500 so I cant go off how much better it would be.. but I do know that its way cheaper to buy a t500 then any quality reman hpop

awesome.
so if your engine had worn pistons and rings your solution would be to add a stroker crank?

lincolnlocker · Mar 7, 2014

m j said:
awesome.
so if your engine had worn pistons and rings your solution would be to add a stroker crank?

Yeah thats it!

live life full throttle

TyCorr · Mar 7, 2014

Jake just might...

lincolnlocker · Mar 7, 2014

TyCorr said:
Jake just might...

Lol

live life full throttle

neverkickn · Mar 7, 2014

LOL, miniature oil threads crack me up!

lincolnlocker · Mar 8, 2014

neverkickn said:
LOL, miniature oil threads crack me up!

Its always a fun time..

live life full throttle

TyCorr · Mar 8, 2014

All oil threads are hilarious. Hpops suck in any capacity. No big effin mystery.

Some suck worse than others.

I still cant see a 160/30 even tickling a healthy 17° pump but thats on topic. I had issues with 175/80 and race tunes holding pressure especially going uphill. High egts and pressure would fall down to 2200 if you held it long enough. On a 50ish k mile 17° pump.

Southmike · Mar 10, 2014

If you change the hpop and you have a e99 pay attention to the gasket.
if it has a screen it will crqck the front cover.

Dmstrucks02 · Mar 11, 2014

Southmike said:
If you change the hpop and you have a e99 pay attention to the gasket.
if it has a screen it will crqck the front cover.

I believe that's the hpop reservoir gasket not the pump gasket

Sent from my SAMSUNG-SGH-I537 using Tapatalk

Ron's Power Stroke · Mar 11, 2014

:whs:
it is the reservoir gasket...

that is some good advise.. many people don't think about this when they see the new gasket....

west76 · Mar 13, 2016

I have a 95 F 350 Powerstroke need to replace the high pressure oil pump do I got to put it in time ?

Sent from my LGLS770 using Tapatalk

m j · Mar 14, 2016

west76 said:
I have a 95 F 350 Powerstroke need to replace the high pressure oil pump do I got to put it in time ?

Sent from my LGLS770 using Tapatalk

no. its just an oil pump