Reply to thread

Message: [QUOTE="vanderchevy18, post: 368405, member: 569"] I have a ton of well pipe on a rack and I slide a 3/4" ID x 1" OD pipe inside a 1" x 1 1/4" pipe for a very strong bar. Then I go to racingrodends.com and get their 3/4" rod ends. Then I get 2x2x1/4 square tubing and notch one end for the axle radius and the other end I radius for 1/2" long 3/4x1" pieces of pipe and weld the pipe pieces to the radiused end of the square to make a very strong pivot. Then I get 3/4" grade 8 bolts and attach the rod ends to the pivots I made from the square tubing. I use pieces of hose from tractor supply that I slip over the bolts to cushion the bolt from the pivot. Then just blast and paint the bar and weld the pivots onto the truck. I have absolutely no rattling, they look good, and nobody including myself have bent any at all. [/QUOTE]

Verification

Random media

IMAG0329

CIMG00271

the_babe

IMG_20140823_242754_948

2 generations of Ford guys

IMG_4966_1_

EE65591B-870B-4EDE-AA63-3A8806063AC5

798

20140613_085114

user123603_pic33586_1373077410

Latest posts

S
2018 f350 dually advance trac and hill descent unavailable ?
- Latest: Smokin 6.0
- Today at 9:45 AM
6.7 Tech & FAQ
T
6.4
- Latest: Tkb6.7
- Yesterday at 11:19 PM
Newly Enlisted
S
6R140 surging issue
- Latest: Smokin 6.0
- Wednesday at 6:40 PM
6.7 Tech & FAQ
B
PMF Traction Bars - Fixed vs Floating
- Latest: Benson1025
- Wednesday at 11:34 AM
Suspension, Drive Train, and Tires
2000 f350 dually lariat
- Latest: ju015dd
- Tuesday at 9:10 PM
7.3 Aftermarket

Members online

projectford

Total: 563 (members: 2, guests: 561)

Top