Reply to thread

Message: [QUOTE="raleighstroke, post: 1412113, member: 26305"] So you guys have not heard from me in while, good news NOT lol...things have been plugging along..was just a coincidence that the ac blower went out. blower motor replaced works fine....now after rebuilding the turbos, deletteeing ***FF EGRR and EGRR blockplates with 750 miles on it I loose boost. nothing...no check engine lights...no reduced engine power lights but obviously no power, it seemed like i was driving an old tractor home...Checked for codes and got P2262 P2263, cleared the codes and drove it for a minute and same thing...decided to clean the MAP sensor and EBP sensor...didnt get them supper clean but the did clean up a little. Reinstalled them and fired it up...heard the turbos again YES!...drove and it had some boost again then after a mile or two back to same limp mode feeling...Checked for codes got P1336...cleared that drove again and same limp feeling then back to no boost no code...checked turbos and they spin free..no leaks..videoed the VGT on startup and it moves to what appears to be the correct position....So this leads to the any ideas question? I am thinking carbon in sensors and I need new ones but not sure.... [/QUOTE]

Verification

Random media

after plasti dip spray

97psd2

Custom Audio Build (extended cab 6.4L)

Capone

Punisher_at_ET_3-5-11_003

Truck

Excursion

Latest posts

4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- 33 minutes ago
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- Sunday at 7:59 AM
6.0 Aftermarket
2000 f350 dually lariat
- Latest: Powerstroke Cowboy
- Saturday at 8:30 PM
7.3 Aftermarket
T
B&W hitch and shock removal
- Latest: TexMac
- Wednesday at 2:48 PM
2017+ 6.7 Aluminum Super Duty
6
ISSUES WITH CHOATES WARRANTY
- Latest: 6.7powersmoke
- Wednesday at 2:12 PM
1999-2015 Superduty Series General

Members online

No members online now.

Total: 557 (members: 0, guests: 557)

Top