Reply to thread

Message: [QUOTE="TARM, post: 362507, member: 578"] Yep it got rotated slightly so the key pathway was clocked from the other part. That part in you pic which is the outside one was what of course went on without issue. It was when the key hit that second "Seal" or whatever you call it. The key pathway was off the width of the pathway. The key plowed into the side of that part. I guess the force caused the whole thing to start going on cocked. That then bent/deformed the actual cylinder itself. Basically it ruined everything but that seal in your pic and the actual part that holds the viscous fluid. I have to take most of the blame as I should have looked very carefully to make sure the pathways were lined up but I did not realize it two parts and it was even possible. IMO ignorance is not a valid excuse so its mostly on me as far as the damage caused. [/QUOTE]

Verification

Random media

2012-05-05_12-02-33_380

dualIPR

dualIPRports

IMAG0667

JoesIPR

step_9

20121013_120041

511-3

Latest posts

S
F-250 & F-350 gear ratio question ?
- Latest: Smokin 6.0
- Today at 10:27 AM
6.7 Tech & FAQ
D
‘10 6.4 rebuild
- Latest: Dieselnewb64
- Thursday at 5:23 PM
6.4 Tech & FAQ
S
F-350 Dually tire size
- Latest: Smokin 6.0
- Thursday at 5:14 PM
6.7 Tech & FAQ
Won’t start issues
- Latest: psduser1
- Sunday at 8:30 PM
7.3 Tech & FAQ
Windshield washer fluid reservoir
- Latest: psduser1
- Sunday at 8:27 PM
7.3 Tech & FAQ

Members online

Kowboy

Total: 683 (members: 1, guests: 682)

Top