Reply to thread

Message: [QUOTE="Patrick Feeley, post: 327920, member: 2142"] Are you meaning that the valvecover gaskets are leaking at the connections? Generally if replacing any of the connections due to melted/burned connectors (either internal or external), you should replace the gasket as well as the burned scorched pins have caused enough heat to melt the plastic of the VC gasket (where oil can leak by the pins). If you have replaced the gasket and it's leaking you need to find out why it keeps happening (shorted glow plug, high resistance connections, etc). Cheers! [/QUOTE]

Verification

Random media

my stufff

initial_key_on

2013-01-06_16-43-37_16

20180720_163114

MG_6989

srt3

20170409_175907

Diesel

Magneto_side_v21

Latest posts

I must be getting old… Exhaust is too loud
- Latest: Derkperk
- Yesterday at 2:18 PM
6.0 Aftermarket
T
B&W hitch and shock removal
- Latest: TexMac
- Wednesday at 2:48 PM
2017+ 6.7 Aluminum Super Duty
6
ISSUES WITH CHOATES WARRANTY
- Latest: 6.7powersmoke
- Wednesday at 2:12 PM
1999-2015 Superduty Series General
Truck slipping into 4th
- Latest: Sterling6.7
- Apr 25, 2025
6.7 Tech
Do not recommend Choate Engineering
- Latest: DEEZUZ
- Apr 23, 2025
Newly Enlisted

Members online

No members online now.

Total: 168 (members: 0, guests: 168)

Top