, I’ve rebuilt this transmission once before and didn’t have any problems , so 2 weeks ago I decided to freshen it up , after tear down, the intermediate and overdrive clutches had a some hot spots but nothing major wrong . I replaced those and checked all others . I got ready to put the pump back in a decided to change the bushing , I screwed up as I was working in my dim lighted shop , I knocked the bushing out the wrong way and busted that lip off the bushing stop or what ever it’s called , so I had a spare pump and robbed that outer half , I also changed the stator tube , I made sure it was a 4R100 stator tube pump half but for gas burner ! , I bought a new converter from the Ford Dealer Also , now the trans had soft shifts , so I pulled it again , OD clutched burned , I thought there was a problem with the pump from changing the half and stator tube , I once again replaced clutches and bought a new reman pump , this is when I put the one way clutch in backwards , I got that fixed and now the trans still has soft shifts , OD is the worse slide bang from feels like low pressure , so I replaced the solenoid pack , same issue .
So I’m wondering if the converter could be the problem even though it’s new , or is that even possible., any help on this would be greatly appreciated.
So I’m wondering if the converter could be the problem even though it’s new , or is that even possible., any help on this would be greatly appreciated.