Reply to thread

Message: [QUOTE="Ipkyss, post: 877642, member: 1737"] Truck is a 04 6.0/auto 142k stock with exhaust and xtreme street tune for the last 4k. Recently bought it. I have read a few gauge issue threads but had a few questions before I started digging into it. I have the dashdaq set on fuel level. 0% empty, 100% full. It's an actual reading, not smoothed or anything. When the truck gauge drops to below empty the dashdaq reads 100 percent. But often times when the truck gauge reads 1/2 tank the dashdaq still reads what it should have. Truck gauge either goes to empty or 1/2 randomly. Just trying to figure out the best place to start. Second issue. Transmission. Very randomly it will go into neutral while trying to shift into 4 or 5th gear. And sometimes while locking the torque converter. Just driving, not beating on it at all. Maybe every 800-1000 miles. It might do it once, or two or three times in a row. Seems to be when the truck is not up to temp most of the time. I don't drive it till it's at least 130* and easy till it's till full temp. And by neutral I mean free rev for 1-2 seconds. [/QUOTE]

Verification

Random media

97psd4

ICP_Flat

IMG_20130401_231835_836

Trans_Ports

Venturi

kg_3

Big_R_Radio_Gospel_Channel

389121_4120055260105_1573847643_n

bed bolt

Latest posts

OEM LED sport headlights
- Latest: KBMKVIII
- Today at 9:11 AM
2017+ 6.7 Aluminum Super Duty
10R140 failure
- Latest: PSD-BLACK-CLOUD
- Friday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- May 7, 2025
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- May 6, 2025
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- May 6, 2025
7.3 Tech & FAQ

Members online

No members online now.

Total: 797 (members: 0, guests: 797)

Top