Fully Built 7.3 Engine

[Obsledpuller]

I'm Tossing around swap ideas and want to gauge interest on my engine and go fast goodies.

3/4 Fill BlockGirdle
R+R RodsCustom .020 over pistons coated
Fire-ringed head/blockStage 2
Gear**** stage 2 Cam
Heads were hand ported
Studs, Pushrods, Springs
Full Force 450/400's
BTS Dual pump setup over adrenaline HPOP
Lewis Built Aluminum Valve covers
Fluidampr
PI Billet Flexplate

Truck went a best of 10.73@127.5 on June 10, 2017

If there isn't enough interest as a whole I will consider parting it but I will not remove it until the long block is sold

12,500

 

[ncollins64]

How many miles on the setup?

 

[imelmo]

That's a good price.


.

 

[Obsledpuller]

How many miles on the setup?

The HPOPs are the only thing not replaced when I put the engine in it has about 150 miles ago this truck has been almost all track use(drove to track a few times). Put it in the end of the season before last so roughly a season and a half of racing on it.

 

[Obsledpuller]

That's a good price.


.

Considering the longblock cost me 18K id say so... :fustrate:

 

[DocBar]

I'm Tossing around swap ideas and want to gauge interest on my engine and go fast goodies.

3/4 Fill BlockGirdle
R+R RodsCustom .020 over pistons coated
Fire-ringed head/blockStage 2
Gear**** stage 2 Cam
Heads were hand ported
Studs, Pushrods, Springs
Full Force 450/400's
BTS Dual pump setup over adrenaline HPOP
Lewis Built Aluminum Valve covers
Fluidampr
PI Billet Flexplate

Truck went a best of 10.73@127.5 on June 10, 2017

If there isn't enough interest as a whole I will consider parting it but I will not remove it until the long block is sold

12,500

No turbo to go with it? What turbo set up were you running ?

 

[Vader's Fury]

Who built the motor?

Any idea what you would want for the long block?

 

[Obsledpuller]

Who built the motor?

Any idea what you would want for the long block?

Carson StaufFer Built the motor.
I Was running a 476/96 and it loved that turbo only problem was the smoke of the 450's lol

I'm thinking around $9500 for the long block if I split it up

 

[Petro]

Any idea what the truck weighed? Curious to know what it was making for power. Bump for ya. GLWS

 

[DieselDC]

Are partial filled blocks okay to DD? I though partially filled blocks are for big ponies? Like for sled pulling/track only kinda deal?


Sent from my iPhone using Tapatalk

 

[79jasper]

That's the purpose of a partial fill, so you still have some cooling.
I can't give you names, but there were people dd'ing them.

Sent from my SM-G892A using Tapatalk

 

[DieselDC]

O "some cooling" haha yeah that about answered all I need to know. Thanks


Sent from my iPhone using Tapatalk

 

[Obsledpuller]

Are partial filled blocks okay to DD? I though partially filled blocks are for big ponies? Like for sled pulling/track only kinda deal?


Sent from my iPhone using Tapatalk

I've never had a cooling issue with this truck. You can 3/4 fill a 7.3 (if done correctly) you won't have any cooling issue as the heat build up in these engines happens prodominantly in the top 2" of the cylinder.
The passages have to be predetermined so coolant can still reach the oil cooler and such.
I know of plenty of people who were able to DD a 3/4 filled block with no issues.
Now if you get into towing a large gross for an extended period i can't speak on that.

 

[DieselDC]

So much power did the motor make to warrant a partial fill? Not poking fun but just curious!


Sent from my iPhone using Tapatalk

 

[imelmo]

240 llama thrust


.

 

[Obsledpuller]

Truck has gone a best of 10.71@127.5 which puts her at roughly 850-950 These blocks typically start to split/crack around 800.

 

[DieselDC]

[emoji106][emoji41][emoji851][emoji964]

Thanks I learned something new today.


Sent from my iPhone using Tapatalk

 

[Obsledpuller]

ttt

 

[Orange Stroker]

How much for just the Dual pump setup? I wouldn't need the bottom pump.