h@s tuning soft shifting

[08twinturbo]

Hey, I tried an h@s on one of my trucks yesterday and loved the tune. 300 hot damn with s1l shifting. Only complaint I have is you can hardly feel it shift. Unless you are in the throttle pretty good. Almost like it slides into gear. So, reloaded the kem 345 and shifting is back to firm on every shift. Power is so close between the two I can hardly tell. 345 takes off harder but 300 pulls hard on top. I hope someone will tweak the shifting with the new mcc. It will be great then.

 

[Dzchey21]

From what I've found it doesn't need much firming, but I did firm up the shifts in my race truck

 

[08twinturbo]

Yes I would just like it firmer when driving easy. 2 -3 shift is the easiest, you can hardly feel it unless you're in the throttle.

 

[08twinturbo]

With the MCC tuning do you have to have a mini max to run the tune once it is written or can you write it with the mini and then transfer the file to a XRT pro if someone else wants the tune.

 

[Dzchey21]

No the only way to use Mcc is on the mini maxx, xrt pro can't do it

 

[08BIGRIG]

You can also use MCC on a Black Maxx as well if you have one.

 

[08twinturbo]

I was just wondering if after you have written the tune using the minimax. Can you save a copy of the tune on your sd card and use it on a truck that doesn't have the mcc tuning. Like if you have 2 trucks.

 

[Dzchey21]

The tunes are vin specific

 

[08twinturbo]

Ok. That's what I wondering. Thanks a lot.