Reply to thread

Message: [QUOTE="wjamesm, post: 1385017, member: 794"] Well i figured out what the problem was .Originally i replaced my turn signal stalk when my wipers wouldn't shut off . After i installed the new stalk my washer fluid wouldn't work , I pulled the washer tank out to test the pump and by the way is where the glow plug module is . Well i had to unplug the module to get the tank out and when reinstalling the plugs back on to the module I didn't feel them click in place but didn't think much of it . well long story short they weren't latched like i thought they were and must have backed out enough to lose contact . The strange part is when i tried to reinstall them this time they wouldn't latch as hard as i could push on them . I even tried to use channel locks . As a last resort i pulled out the rubber weather seal and they then latched . So i filled the connectors with dielectric grease and reinstalled them . [/QUOTE]

Verification

Random media

20180808_160558

67CatchCan

110

2011-07-06_22-25-01_636

12_-_2

theres-door-now-get-****-out

EDGE INSIGHT CTS

P1000853

ELEANOR_S_TRANS_COOLER_NOT_FOR_BIG_HANDED_PEOPLE

2011-07-09_18-15-16_855

photo_7_2

Latest posts

Truck slipping into 4th
- Latest: Sterling6.7
- Yesterday at 8:29 PM
6.7 Tech
Do not recommend Choate Engineering
- Latest: DEEZUZ
- Wednesday at 10:22 PM
Newly Enlisted
A few turbo questions and a rant
- Latest: ghohouston
- Wednesday at 9:41 PM
7.3 Aftermarket
O
2011-2016 Radiator upgrade
- Latest: OtisCreekConstruction
- Wednesday at 6:17 PM
6.7 Tech
Performance shops
- Latest: DEEZUZ
- Tuesday at 8:42 AM
7.3 Performance

Members online

No members online now.

Total: 540 (members: 1, guests: 539)

Top