Krause
New member
Hey guys,
Not sure if this is allowed, but Im just gonna post some links to old info from the nation just because that's where this info is at the moment. I need to replace my headlight housings because one of mine melted, and bit scary but long story short I would like to change them up. Eventually, I'll be doing the projector setup that has been done previously from TRS.
http://www.theretrofitsource.com/co...orimoto-mini-stage-3-kit-h1.html#.U6LtlpRdXm8
With that said, I wanted to ask everyone's opinion on potential headlight housings. Crummy posted a good thread about his here on the nation.
http://powerstrokenation.com/forums/...dlight+upgrade
where he used a Spyder housing ( http://www.spyderauto.com/product.ph...q=5012500&cat= ) along with a clear bumper.
MustangMatt has another great thread here
http://powerstrokenation.com/forums/...dlight+upgrade
where he used a set of clear ebay housings/bumpers/corners ( 1992 1996 Ford F150 F250 Bronco Head Lights Bumper 1995 | eBay )
So pretty much I'm on the fence about whether to get the spyder headlight housing or a set of ebay ones or ones from Complete Perf for less money, keeping in mind whichever one I get will get projectors put in them eventually.
-I like the 1 piece upper design of the spyder housing, but not super thrilled about the look of the corner area, but Crummy's truck looks good IMO
-Prefer the stock look of the corners on the 2 piece units, just wish they were a one piece setup, maybe Im being dumb?
Thoughts/experience/opinions on styling with these? Between
http://www.spyderauto.com/product.ph...q=5012500&cat=
http://www.ebay.com/itm/92-96-FORD-...Parts_Accessories&hash=item58ae53ff35&vxp=mtr
http://www.ebay.com/itm/1992-1996-F...fits=Model:Bronco&hash=item2a3cd320a5&vxp=mtr
http://shop.cptrucks.com/product_p/headlights-clear.htm
Not sure if this is allowed, but Im just gonna post some links to old info from the nation just because that's where this info is at the moment. I need to replace my headlight housings because one of mine melted, and bit scary but long story short I would like to change them up. Eventually, I'll be doing the projector setup that has been done previously from TRS.
http://www.theretrofitsource.com/co...orimoto-mini-stage-3-kit-h1.html#.U6LtlpRdXm8
With that said, I wanted to ask everyone's opinion on potential headlight housings. Crummy posted a good thread about his here on the nation.
http://powerstrokenation.com/forums/...dlight+upgrade
where he used a Spyder housing ( http://www.spyderauto.com/product.ph...q=5012500&cat= ) along with a clear bumper.
MustangMatt has another great thread here
http://powerstrokenation.com/forums/...dlight+upgrade
where he used a set of clear ebay housings/bumpers/corners ( 1992 1996 Ford F150 F250 Bronco Head Lights Bumper 1995 | eBay )
So pretty much I'm on the fence about whether to get the spyder headlight housing or a set of ebay ones or ones from Complete Perf for less money, keeping in mind whichever one I get will get projectors put in them eventually.
-I like the 1 piece upper design of the spyder housing, but not super thrilled about the look of the corner area, but Crummy's truck looks good IMO
-Prefer the stock look of the corners on the 2 piece units, just wish they were a one piece setup, maybe Im being dumb?
Thoughts/experience/opinions on styling with these? Between
http://www.spyderauto.com/product.ph...q=5012500&cat=
http://www.ebay.com/itm/92-96-FORD-...Parts_Accessories&hash=item58ae53ff35&vxp=mtr
http://www.ebay.com/itm/1992-1996-F...fits=Model:Bronco&hash=item2a3cd320a5&vxp=mtr
http://shop.cptrucks.com/product_p/headlights-clear.htm
Last edited:
