Reply to thread

Message: [QUOTE="7.3 MACHINE, post: 82401, member: 2079"] I'm trying to do the high beam fog light mod that i saw done on a 2003 but mine has different color wires (02) than the forum showed on the 2003. Anyone done this mod ? "Ok, since no one was posting pics I went out and made took my own pics of the high beam/fog lights on mod. Pull the lever horizontally with the plug, the wire plug will lift up while you pull the lever. The wire to be cut is a green with black stripe on my 03 7.3 eddie X. I crimped on and then soldered on a 9mm lug. I located a factory ground location on the right side of the removed lower dash panel. Bolted down the new lug with the factory single wire lug. Stripped the end of the new wire after measuring and the end of the green wire coming from the harness plug. Don't forget to put the heat shrink on! Wires pushed together. Twisted. Soldered. Heat shrunk. Heat shrink the end of the green wire coming out of the wire harness and put everything back together. Works perfect on my 03." [/QUOTE]

Verification

Random media

Dual IPRs

2011-11-09_18-15-02_573

Pea_shooter

Underside_31

In progress

3-7_096

my handy work

IMAG0529

Truck pics.

20140325_105626

Latest posts

Won’t start issues
- Latest: psduser1
- Sunday at 8:30 PM
7.3 Tech & FAQ
Windshield washer fluid reservoir
- Latest: psduser1
- Sunday at 8:27 PM
7.3 Tech & FAQ
F-250 & F-350 gear ratio question ?
- Latest: Mark Kovalsky
- Sunday at 6:57 PM
6.7 Tech & FAQ
Y
2001 Ford F350 7.3 l powerstroke diesel windshield washer fluid reservoir
- Latest: Yojih123
- Sunday at 12:15 PM
7.3 Tech & FAQ
s364.5
- Latest: htsummers22
- Saturday at 10:54 PM
Want to Buy

Members online

No members online now.

Total: 783 (members: 0, guests: 783)

Top