Holset turbo on a 02 F-250

Smokin 6.0 · Jul 31, 2014

Are all the HX style chargers the same mount ?

Magnum PD · Jul 31, 2014

Should be T4i but would need to confirm before getting turbo.

79jasper · Dec 30, 2014

V-Ref said:
I didn't mean to steer him wrong...the one I held not even a month ago was a T4i. ..we measured it just to be sure. Maybe it wasn't a hx40? ?? hmmm

Mine looks to be T4.
Still gotta measure the wheels.
Exhaust housing is a 17cm.

Sent from my SM-T537R4 using Tapatalk

jngreen · Dec 30, 2014

powerstrokenstang said:
You need hx50 not 40. 40 is way too small

That's what I was thinking also. Isn't an HX 40 a stock turbo on some 5.9 Cummins? I would think that would be smaller or similar size to a stock turbo on a 7.3.

Smokin 6.0 · Dec 30, 2014

I think a HX35 is a stock Cummins turbo at least up until the common rail in 03.. I think atleast

Magnum PD · Dec 30, 2014

:whs: they had a T3 mount.

Groomzybanshee · Dec 31, 2014

There's hx 40s with t3s also.

79jasper · Dec 31, 2014

The compressor is 58mm at the top, 82mm at the bottom, and 27mm tall. 8 blade.
Exhaust side will have to wait.
Air inlet and exhaust outlet are 4"
Charge air outlet is 2 1/2"
Got the flange measurements, if the link will work.
The inner holes are 1 15/16 X 1 5/16
And the flange bolts holes are 7/16
https://www.dropbox.com/s/bhhyglqls43cbl3/2014-12-31_01.34.23.jpg?dl=0