i need filter help

glamis

New member
Joined
May 22, 2011
Messages
382
Reaction score
0
ok im finally getting some money toghther
i obviousley need to filter my oil better
my plan is to blend,settle a couple of days
drain off the bottom and filter it

but i keep being in a hurry
and buying filter heads i cant find filters for
or find filters that are good,but cost 28.00 dollers each
i look on mcmaster-carr
but i cant seem to figure what corrisponds to what

if someone could lay out staged filter set up
i would go buy it,in need something that will work,for a change

i just cant figure it out on line
ans theres no store here that has everything i dont think...

P.S.
i will be pulling throught he filters with this beauty
hopefully it works better than my last 2 pumps did

http://www.harborfreight.com/12-volt-diesel-transfer-pump-66784.html
 
Last edited:

SkySki Jason

New member
Joined
Jun 3, 2011
Messages
229
Reaction score
0
Location
N. GA Mountains
I've used this housing with SS mesh screens for initial filtering and with $6 each (at Tractor Supply) 10mic elements for intermediate filtering.
http://www.jmesales.com/item/135703/National-Spencer-Farm-Filter.aspx

Then I use these 2mic filters for 'final' filtering:
http://www.jmesales.com/item/121575/Cim-Tek-Bio-Tek-Microglass-Filters-Particulate-Filter.aspx

and the head/adapter ($10 in cast iron/$14 in alum):
http://www.jmesales.com/item/36198/Cim-Tek-Fuel-Filter-Adapters.aspx

I used a 30mic spin-on for awhile, but I could buy 3-4 of the goldenrod 10mic elements for price of one 30mic - so I quit using the 30's.


Well, don't expect much from that pump... Are you using it to collect and process oil? For volume and pressure, I suggest a 1hp gas-powered (centrifugal) water pump. I've been using a 1hp Honda 4cycle 1" water pump for years now. The HF 2stroke versions are about the same price as that pos HF 12v pump... If you must have 12v, the Redline Pumps (uses SBC oil pump/aka. Melling 55) are prolly best. You can build your own SBC pump for under $25 and power it with a cordless drill or WHATEVER you can dream up.

Check out post 11 for a member here who makes a mount for SBC pump:
http://www.powerstrokearmy.com/forums/showthread.php?t=2310&page=2
 
Last edited:

SkySki Jason

New member
Joined
Jun 3, 2011
Messages
229
Reaction score
0
Location
N. GA Mountains
Here's my Honda:
0220091123.jpg


And the venerable $30 HF 'blue pump' (110v 1" Clear Water pump) - set up with filter on pressure-side:
1120081329.jpg


The only problem with the 'blue pump' is it WILL NOT self-prime. If it is not plumbed in a way that maintains head pressure on the pump - you must use a check valve or something on the suction side to keep the suction hose full of oil. (see my PVC CV??) I have a friend who recently set up one of these pumps with a tee on suction inlet to pump. The vertical side of tee stick straight up and has a valve, then is necked up to like 1.5" dia PVC. Since this pump is stationary/hard-plumbed, it would be difficult to fill the suction line if he lost prime... This way, he just fills the 1.5" pvc with oil, opens valve and turns pump on. Once its 'primed', he closes valve and pumps away.

I don't have any pics of my SBC pump with me right now, but it was built using these plans:
http://www.frybrid.com/forum/showthread.php?t=10978
 

Mdub707

Active member
Joined
May 18, 2011
Messages
5,079
Reaction score
0
Location
Mohawk NY
Great info Jason. I've been looking into coming up with something serious for collection soon...
 

Latest posts

Members online

Top