Reply to thread

Message: [QUOTE="atc500, post: 1553886, member: 14283"] The ipr is maxing out 85%. The pump Is a New thumper II I’ve already been through my stock pump which held more Icp then the thumper I. Now I have a thumper II which is holding better Icp then the other two but it’s still not holding max Icp about 3400psi, the engine is calling for 3900+psi I’m about 500psi low the way I see it there is more efficiency/power to be had, so I believe either I have a high pressure oil leak or possible the low pressure side has some kind of blockage? But like I said I’ve air tested the system directly through the ipr port and had zero leaks even after 2hrs on a hot motor [/QUOTE]

Verification

Random media

Excursion

22's

SSBC Brakes

eleanor_part_two_38_

fuel_cell_2

IMAG0826

IMG_20150418_142620656_HDR

F1710918-3DAD-48CC-8483-7F47DA35BFA3

IMAG1599

Latest posts

10R140 failure
- Latest: PSD-BLACK-CLOUD
- Today at 4:11 PM
2017+ 6.7 Aluminum Super Duty
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Today at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Today at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- Sunday at 7:59 AM
6.0 Aftermarket
2000 f350 dually lariat
- Latest: Powerstroke Cowboy
- Saturday at 8:30 PM
7.3 Aftermarket

Members online

No members online now.

Total: 670 (members: 0, guests: 670)

Top